
hello mike, yeah I know I have to replace my digital camera which was lost in auto fire last year.anyway the benroy is pretty standard,8' long 4' wide. 1/4 '' ply walls ,3/4 " L shaped galley and back,1/2" ply for floor on 2x4 frame.spars are spaced 8", 1x2 pine,ceiling 1/8 tempered hard board( went right in and curved inside 20" front radius)doors are cut from 1/4" sides 16" back from front,doors are 32 wide x 39"tall ,3/4 pine around edge 2 3/4" wide, doors have 6" radius on corners (which i will change on next build to a much smaller radius)doors hung on piano hinge ,3/4 x2 3/4 jambs glued to inside of 1/4" walls.then 1/4" ply door stop with 3/8 lip(much like Steve F. jambs). the thing that amazes me the most is once the L shaped galley ,ribs ,ceiling,and floor and cabin shelf/cabinet were in.. THIS thing is RIGID. like an egg.1/4 " walls are plenty and next time i will omit 2x4 frame and go with 3/4 pine with 1/2 floor probably will omit all 3/4 inch ply..build light and construct well.