Finalized Shape but NEED HELP.

[Randy S. Hager]

Hi all, Here is my finalized shape for my TTT that will fit my family needs really well. It is a more rounded profile of Gerald_G's nice TTT. His interior arrangement is what I've been agonizing over. I didn't want to get too big but didn't want to have the galley outside so if we get a sudden shower we can still fix lunch and watch a movie. Let me know what you think.

Randy S. Hager
Venus, TX




I tried to attach a picture.

[Steve F]

This one? Looks nice



Cheers
Steve

[Randy S. Hager]

Ah Mate how'd you do that????????????

I tried to use the [img] tags and just didn't get it to take.

Thanks Steve!

Randy S. Hager
Venus, TX

[Steve F]

Yep, just image tags so



Without the spaces after and before the two tags.

Cheers
Steve

[Randy S. Hager]

That's the way I was trying to do it but only got the underlined link and not a picture.

Thanks again Steve

Randy S. Hager
Venus, TX

[Randy S. Hager]

Hi gang, anyone interested in helping me with seeing this design in Sketchup? I can't seem to get very far with it. It might be my laptop not haing enough memory to process things. I'd like to see it fleshed out and have a look inside at things to see how it will be arranged. I know I would like to have bunks in the rear to the left of the door then the toilet/shower directly accross from the door then a closet. On the curb wall would be the galley with the frig next to the door and then the cooktop/range with cabinets over them. I would guess this thing needs to be at least 12 - 13ft long to get all inside. Would it still be a TTT??????????????? Any and all help would be appreciated.


DRAWING NOT TO SCALE

(Thanks Steve F, it worked this time)

Thanks in advance
Randy S. Hager

[wlivesey]

Wat size beds would you like in the trailer? I think they will drive the overall size...

[bgordon]

Hi,

Here's something to at least look at... (while you're daydreaming)

[TheDuke]

Randy,
Ran into the same problem with my older laptop with 512K RAM. Tried to get Sketchup to load and found it needs 2M RAM to work. So I use the tower to do Sketchup. That's probably what you're facing.
TheDuke

[Randy S. Hager]

Barrie:
WOW, thanks a lot for that rendering. I'll need to load Sketchup on my tower like Duke said he had to. I've got to see if I can get a little more in depth with this design.

Duke:
I was looking closely at your design for a while. I think I will get a 256K memory(320K total) stick for my laptop since it only has 128K + 64k built-in but will also load Sketchup on my PC to get things started.

Thank you both

Randy S. Hager
Venus, TX

[Randy S. Hager]

wlivesey;
The front dinnet will be the main sleeping area and I was thinking the trailer would be 78" wide and bed/seat would be 60" the rear bunks would only need to be 24" - 26" wide and be the width of the trailer. I'll do another MS Paint sketch and see how it looks and post it to my Album. Take a look at Gerald_G's trailer since his is what I based mine off of. BTW..... PM me to let me know your location here in DFW.

Thanks for your help

Randy S. Hager
Venus, TX

[Randy S. Hager]

Hey, I tried using Setchup to draw my design but, could not figure out how to close up the areas that I needed to erase to make the upper and lower rounded shapes. How do I close these areas up? Also, how do I define the drawn areas with the dimension I want for the plan form? I want 6' 6" width 6' 6" height and 12' length. I can't seem to find a place to define these dimension so I can have the floor plan form set before I make it a solid box to start refining the shape.

Thank you
Randy S. Hager