Page 1 of 1
The Tackle Box - My Beginner Level Design
Posted:
Wed May 19, 2010 6:04 pmby drewstall
Here is a design I came up. I tried to make this the easiest it could possibly be. Even though there are already a ton of designs here, I figured I would see what everyone here thought of this one.
<IMG SRC="http://lh4.ggpht.com/_su2f2Gssp2A/S-fX5R8vi3I/AAAAAAAACl0/O1nyqFO4oxw/s144/PAGE%201-COVER%20PAGE.jpg" ALT="The Tackle Boxt" WIDTH=110 HEIGHT=85>
http://picasaweb.google.com/lh/photo/lfjnK3dJsCxU4_bK1olUDqbXkhYibOOZIfBIgAWnZWM?feat=directlink
Posted:
Wed May 19, 2010 6:06 pmby drewstall
I should probably also mention that I can e-mail you the pdf's if you need some better image quality.
Posted:
Wed May 19, 2010 6:17 pmby planovet
How about a bigger picture?
Posted:
Wed May 19, 2010 6:27 pmby mikeschn
Looks like a good design to me. Throw some fenders on it, and you'll be good to go!
mike...
Posted:
Thu May 20, 2010 4:12 pmby drewstall
The picture actually isn't the design. Here is a link to the entire album that has all the technical drawings.
http://picasaweb.google.com/AndyStall/AndySWWWTeardropTrailerPlansPage?authkey=Gv1sRgCPrhivvAoIrO_QE&feat=embedwebsite#
Sorry about that.
Posted:
Thu May 20, 2010 4:45 pmby mikeschn
Andy,
You did a nice job on the plans... I have an 11 x 17 printer!
I like your disclaimer...
...call before you dig, objects in mirror are closer than they appear, etc..
Mike...
Posted:
Thu May 20, 2010 4:47 pmby YuGun
Basic, Useable, Economical,
I like it.
What is the drawing program?
Posted:
Thu May 20, 2010 7:38 pmby drewstall
I used Autodesk Inventor.
Posted:
Thu May 20, 2010 8:41 pmby S. Heisley
Andy:
Your build plan is incredible!
Posted:
Sat May 22, 2010 1:18 pmby drewstall
Thanks. My goal was to make designs that were better than the ones I had begun using from a company that makes large wooden teardrops.
Posted:
Wed Jun 02, 2010 7:15 pmby ashkanr
Great Job! Very clear images.....nice design....
The disclaimer was unique! Loved it!
CAD Files
Posted:
Tue Jun 15, 2010 8:24 amby ashkanr
Here in Ontario, It is really hard to get the exact same trailer you have used for the designs. I was wondering if you could post the CAD files so that I can try to modify them to the size of available trailers over here.
Thanks!
Re: CAD Files
Posted:
Wed Jun 16, 2010 12:46 amby BC Dave
drewstall
nice design work and Cad dwgs;
.... you put lots of work into those files ...
.... just sayin ...
ashkanr wrote:... It is really hard to get the exact same trailer you have used for the designs. I was wondering if you could post the CAD files so that I can try to modify them to the size of available trailers over here.
Thanks!