LowBoy Sleeper only and Popup idea

LowBoy Sleeper only and Popup idea
Ok Guys, and Gals, ( and others )
This is just me thinking out loud. Took about an hour to throw this together. I dont not have any plans for this other than my head and what I did in the Cad Program , Wings3d. It is based off a FULL size mattress ( 54x75 ) The Rulers shown are 6 foot. The Camper rim size is 13 and tires are med profile. As it is shown now the body is 59 inches wide, but wall thickness is not true.
First Pic is just the LowBoy Sleeper only with a small storage section in back. A galley can be installed but would be too low to comfortably use. The storage in back is for your gear and eliminates the need for a tongue box. This keeps it sleek, clean, and simple. If you make the nose more rounded you can get some storage up front. Here I have some front cabinets and a back shelf in this rendition.

This is the camper from above and from the aft right.

Now, The PopUp idea.
I just got board for the next few pictures. This camper has a shell that raises up. The shell is completely hollow and had 5 sides, the top and front rounded area counts as two sections. It lifts off an internal box, mounted to the frame, where the sleeping area is places. The front self can be access only when the shell is in the up position. Small lightweight weight shelves can be attached to the top of the camper, or a separate folding back cabinets system can be made as pictured. The ( galley ) storage box is a separate box in this concept.






OK as stated above this is just me thinking out loud. Door placement and how it works and lifting part still just in my head. Any suggestions from the peanut gallery?
Ok Guys, and Gals, ( and others )
This is just me thinking out loud. Took about an hour to throw this together. I dont not have any plans for this other than my head and what I did in the Cad Program , Wings3d. It is based off a FULL size mattress ( 54x75 ) The Rulers shown are 6 foot. The Camper rim size is 13 and tires are med profile. As it is shown now the body is 59 inches wide, but wall thickness is not true.
First Pic is just the LowBoy Sleeper only with a small storage section in back. A galley can be installed but would be too low to comfortably use. The storage in back is for your gear and eliminates the need for a tongue box. This keeps it sleek, clean, and simple. If you make the nose more rounded you can get some storage up front. Here I have some front cabinets and a back shelf in this rendition.

This is the camper from above and from the aft right.

Now, The PopUp idea.
I just got board for the next few pictures. This camper has a shell that raises up. The shell is completely hollow and had 5 sides, the top and front rounded area counts as two sections. It lifts off an internal box, mounted to the frame, where the sleeping area is places. The front self can be access only when the shell is in the up position. Small lightweight weight shelves can be attached to the top of the camper, or a separate folding back cabinets system can be made as pictured. The ( galley ) storage box is a separate box in this concept.






OK as stated above this is just me thinking out loud. Door placement and how it works and lifting part still just in my head. Any suggestions from the peanut gallery?
