First Build - Squareback
Posted: Thu Jul 19, 2018 10:20 amHello from the far side of the Atlantic.
I am working on my first squareback trailer build/design.
Here are a few questions for the informed members.
- Roof top tent position. Should I move it forward more, or is it centered over the axle in a good position.
- Weight of galley kitchen an issue with fridge, shelves and cabinets?
Building method is 3/4 ply with cutouts for foam, 1/8 skin inside and out. Floor in 1/4 skins and 3/4 cross members.
Roof in 1" lumber pieces with 1/8 ply top and bottom with foam in between.
Wall to floor attachment:
Any ideas how to seal that bottom edge of the wall to the frame?
Cheers, Christoph
I am working on my first squareback trailer build/design.
- Teardrop - exterior.jpg (51.53 KiB) Viewed 2945 times
- Sideview.jpg (39.52 KiB) Viewed 2945 times
Here are a few questions for the informed members.
- Roof top tent position. Should I move it forward more, or is it centered over the axle in a good position.
- Weight of galley kitchen an issue with fridge, shelves and cabinets?
Building method is 3/4 ply with cutouts for foam, 1/8 skin inside and out. Floor in 1/4 skins and 3/4 cross members.
Roof in 1" lumber pieces with 1/8 ply top and bottom with foam in between.
Wall to floor attachment:
- Teardrop Frame to Wall Detail.jpg (41.62 KiB) Viewed 2945 times
Any ideas how to seal that bottom edge of the wall to the frame?
Cheers, Christoph