Tiny minimalist sleeper/stand up with trailtop componen

Did you just design your very own teardrop or tiny trailer? Want to discuss it? Here's the place to post your design for discussion!

Tiny minimalist sleeper/stand up with trailtop componen

Postby saywhatthat » Sun Jun 28, 2020 8:34 pm

What do you think. Tiny minimalist sleeper/stand up. . The planning for a new trailtop fiberglass component trailer. Think Legos .Please any thoughts good bad post them. Some of the things I would like in this design. Light some aerodynamics on the back .Can be reversed in design Easley look at fender placement. So a cross of Clipper Express and Wild goose . A fold up. Opened so can set in side when weather goes bad. Can be folded down and still be slept in at no tents camping grounds. Also when it is cold. . Body heat. That could carry a canoe on top. no doors back opens like a tent. Have 3 different style going on. Should the round part be in back are front? can not makeup my mind.
. One more to think about rounded on the two corners. Neighbor is build a clamshell roof top tent using 4 rounded corners .Also a coffee kiosk .using 4 rounded corners
tt1.jpg
tt1.jpg (223.14 KiB) Viewed 3425 times
t 004.jpg
t 004.jpg (217.31 KiB) Viewed 3425 times
tt3.jpg
tt3.jpg (240.61 KiB) Viewed 3425 times
Il suffit de le faire
fast, cheap, fiberglass/ foam stressed skin panels
viewtopic.php?f=50&t=73945

Build 4.5 by 8' using Trailtop fiberglass Components
http://tnttt.com/viewtopic.php?f=50&t=70729
User avatar
saywhatthat
500 Club
 
Posts: 500
Images: 135
Joined: Sat Jun 11, 2016 3:31 am

Re: Tiny minimalist sleeper/stand up with trailtop componen

Postby saywhatthat » Mon Jun 29, 2020 12:02 am

This is the hinge I will be placing on the back lifting roof . Cost less than hurricane hinge .Should not leak.
charniere.jpg
charniere.jpg (49.61 KiB) Viewed 3401 times
b
Toit.jpg
Toit.jpg (57.41 KiB) Viewed 3401 times
Il suffit de le faire
fast, cheap, fiberglass/ foam stressed skin panels
viewtopic.php?f=50&t=73945

Build 4.5 by 8' using Trailtop fiberglass Components
http://tnttt.com/viewtopic.php?f=50&t=70729
User avatar
saywhatthat
500 Club
 
Posts: 500
Images: 135
Joined: Sat Jun 11, 2016 3:31 am

Re: Tiny minimalist sleeper/stand up with trailtop componen

Postby saywhatthat » Wed Jul 15, 2020 3:58 pm

This is the profile I will be going with. To me the hardest part is with the lego parts. Is when you move them around they all look cool. Would like it to open like the picture. Do I cut for the lifting part? down the center are at the roof line
andal.png
andal.png (88.69 KiB) Viewed 3282 times

fb2.jpg
fb2.jpg (72.77 KiB) Viewed 3282 times
Il suffit de le faire
fast, cheap, fiberglass/ foam stressed skin panels
viewtopic.php?f=50&t=73945

Build 4.5 by 8' using Trailtop fiberglass Components
http://tnttt.com/viewtopic.php?f=50&t=70729
User avatar
saywhatthat
500 Club
 
Posts: 500
Images: 135
Joined: Sat Jun 11, 2016 3:31 am
Top

Re: Tiny minimalist sleeper/stand up with trailtop componen

Postby saywhatthat » Sat Aug 29, 2020 5:24 pm

did not have the guts to do a clam-shell. So this is where I am today.
utf 017.jpg
utf 017.jpg (191.14 KiB) Viewed 3009 times
Il suffit de le faire
fast, cheap, fiberglass/ foam stressed skin panels
viewtopic.php?f=50&t=73945

Build 4.5 by 8' using Trailtop fiberglass Components
http://tnttt.com/viewtopic.php?f=50&t=70729
User avatar
saywhatthat
500 Club
 
Posts: 500
Images: 135
Joined: Sat Jun 11, 2016 3:31 am
Top

Re: Tiny minimalist sleeper/stand up with trailtop componen

Postby saywhatthat » Fri Mar 26, 2021 10:16 pm

last Aug. shoved this frame into storage where it set no warping are rot . To put fiberglass skin on Go to the outside corners of resets drill 1/8'' hole . lay the skin on outside of frame .Go to inside find holes .Drill through the skin . Then connect the holes and cut . The reset in the round part will draw on clear vinyl then transfer Trailtop components style build
new 026 small.png
new 026 small.png (453.16 KiB) Viewed 2065 times
Il suffit de le faire
fast, cheap, fiberglass/ foam stressed skin panels
viewtopic.php?f=50&t=73945

Build 4.5 by 8' using Trailtop fiberglass Components
http://tnttt.com/viewtopic.php?f=50&t=70729
User avatar
saywhatthat
500 Club
 
Posts: 500
Images: 135
Joined: Sat Jun 11, 2016 3:31 am
Top


Return to Member Designs

Who is online

Users browsing this forum: No registered users and 3 guests