V-twin mini bike

[bdosborn]

Awesome! Sounds like the big ones.
Bruce

[JasenC]

Ran across your start up vid the other day, just read through your thread, vary cool man.

[tony.latham]

https://www.youtube.com/watch?v=RO-MAGi2wHM

Tim:

The more I listen to that engine, the more I think I need to call 9-1-1. Badass.

Tony

[JasenC]

https://www.youtube.com/watch?v=RO-MAGi2wHM

Tim:

The more I listen to that engine, the more I think I need to call 9-1-1. Badass.

Tony

But we haven't even gotten to the hold my beer part yet, or are you just trying to be prepared?

[noseoil]

Still working on it. I've had trouble over the years with a "rattle can" finish drips, runs & sags. Decided to make something so there can be no runs! It's an anti-gravity machine for removing runs, crude but effective! I'm still looking for an old BBQ rotisserie drive motor, so I can get away from this manual anti-gravity device...

[Pmullen503]

Such a cool project!

Another source of free gear motors for rotating fixtures is from the switch timer from and old washer or dryer. or the valve actuator from a water softener. I made a device for "slosh casting" in silicone molds to rotate the mold until the resin sets. I used a pulley, gear and a toothed belt scavenged from a large laser printer. I mounted the motor on an arm so I could detension the belt and turn the armature by hand if needed.