The new campfire thread...ooooh purrrrty!!!!!!

Things that don't fit anywhere else...
Post a reply

Postby Fenlason » Tue Apr 19, 2011 5:06 am

toypusher wrote:Glenn, I just tried to check you last post on the 'Killer' thread and it says 'No posts exist for this topic' or whatever like our thread was doing!! :roll:

If you go back a page, it is fine - just like our campfire thread!


towards the end of the page.. it does that.. then goes back to "normal" :thinking:
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby toypusher » Tue Apr 19, 2011 5:07 am

Fenlason wrote:
toypusher wrote:Glenn, I just tried to check you last post on the 'Killer' thread and it says 'No posts exist for this topic' or whatever like our thread was doing!! :roll:

If you go back a page, it is fine - just like our campfire thread!


towards the end of the page.. it does that.. then goes back to "normal" :thinking:


Weird stuff!

Time for Mike to upgrade the board, me thinks. :thinking:
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby Fenlason » Tue Apr 19, 2011 5:11 am

I got my 3 Whitcomb latches in... :D

I have some doors downstairs that need finishing.. and latches. :thinking:

I think I will wait until I get my planer in.
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby Fenlason » Tue Apr 19, 2011 5:12 am

toypusher wrote:
Fenlason wrote:
toypusher wrote:Glenn, I just tried to check you last post on the 'Killer' thread and it says 'No posts exist for this topic' or whatever like our thread was doing!! :roll:

If you go back a page, it is fine - just like our campfire thread!


towards the end of the page.. it does that.. then goes back to "normal" :thinking:


Weird stuff!

Time for Mike to upgrade the board, me thinks. :thinking:


upgrade... :frightened: you mean replace us with better looking, smarter people... :cry: :cry:
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby toypusher » Tue Apr 19, 2011 5:18 am

Fenlason wrote:I got my 3 Whitcomb latches in... :D

I have some doors downstairs that need finishing.. and latches. :thinking:

I think I will wait until I get my planer in.


Planer? Whatcha getting?? I have a Delta 12.5" portable planer.
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby toypusher » Tue Apr 19, 2011 5:18 am

Fenlason wrote:
toypusher wrote:
Fenlason wrote:
toypusher wrote:Glenn, I just tried to check you last post on the 'Killer' thread and it says 'No posts exist for this topic' or whatever like our thread was doing!! :roll:

If you go back a page, it is fine - just like our campfire thread!


towards the end of the page.. it does that.. then goes back to "normal" :thinking:


Weird stuff!

Time for Mike to upgrade the board, me thinks. :thinking:


upgrade... :frightened: you mean replace us with better looking, smarter people... :cry: :cry:


Nope, just the software. Like I am in the process of doing for the TearJerkers site! :)
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby Fenlason » Tue Apr 19, 2011 5:19 am

I will use the tamper on my bench cut section.. and use my leaf blower on the same. I am anxious to get out on my other trails.. but it is wet out there.. or wet to bring my equipment. There is more cutting I could do in the new playground area. Perhaps service my Toro today.. :thinking:
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby Fenlason » Tue Apr 19, 2011 5:20 am

toypusher wrote:
Fenlason wrote:I got my 3 Whitcomb latches in... :D

I have some doors downstairs that need finishing.. and latches. :thinking:

I think I will wait until I get my planer in.


Planer? Whatcha getting?? I have a Delta 12.5" portable planer.


hmmm a Porta Cable Jointer Planer..

I had an ancient Sears one.. that sits and hums now... :roll:
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby toypusher » Tue Apr 19, 2011 5:20 am

Fenlason wrote:I will use the tamper on my bench cut section.. and use my leaf blower on the same. I am anxious to get out on my other trails.. but it is wet out there.. or wet to bring my equipment. There is more cutting I could do in the new playground area. Perhaps service my Toro today.. :thinking:


I meant to ask when you mentioned the bench cutting before, but forgot. How much did you have to cut in on the high side of the trail??
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby toypusher » Tue Apr 19, 2011 5:21 am

Fenlason wrote:
toypusher wrote:
Fenlason wrote:I got my 3 Whitcomb latches in... :D

I have some doors downstairs that need finishing.. and latches. :thinking:

I think I will wait until I get my planer in.


Planer? Whatcha getting?? I have a Delta 12.5" portable planer.


hmmm a Porta Cable Jointer Planer..

I had an ancient Sears one.. that sits and hums now... :roll:


anything that you know? :lol:
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby Fenlason » Tue Apr 19, 2011 5:22 am

it's just a small 6" benchtop model..
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby Fenlason » Tue Apr 19, 2011 5:23 am

toypusher wrote:
Fenlason wrote:I will use the tamper on my bench cut section.. and use my leaf blower on the same. I am anxious to get out on my other trails.. but it is wet out there.. or wet to bring my equipment. There is more cutting I could do in the new playground area. Perhaps service my Toro today.. :thinking:


I meant to ask when you mentioned the bench cutting before, but forgot. How much did you have to cut in on the high side of the trail??


hmm maybe 6" or so.. we will see how that works. I think it will be level enough [still want a slight outslope] It just might not be wide enough... :thinking:
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby Fenlason » Tue Apr 19, 2011 5:24 am

toypusher wrote:
Fenlason wrote:
toypusher wrote:
Fenlason wrote:I got my 3 Whitcomb latches in... :D

I have some doors downstairs that need finishing.. and latches. :thinking:

I think I will wait until I get my planer in.


Planer? Whatcha getting?? I have a Delta 12.5" portable planer.


hmmm a Porta Cable Jointer Planer..

I had an ancient Sears one.. that sits and hums now... :roll:


anything that you know? :lol:


no.... :thinking: I think it was a country song.. :roll: :lol:
glenn

Forget not that the earth delights to feel your bare feet and the winds long to play with your hair.
Kahlil Gibran

We don't stop playing because we grow old. We grow old because we stop playing.
George Bernard Shaw
User avatar
Fenlason
Tour de Post Yellow Jersey
 
Posts: 75849
Images: 221
Joined: Sat Sep 23, 2006 2:33 pm
Location: Winslow Me.
Top

Postby toypusher » Tue Apr 19, 2011 5:25 am

Fenlason wrote:
toypusher wrote:
Fenlason wrote:I will use the tamper on my bench cut section.. and use my leaf blower on the same. I am anxious to get out on my other trails.. but it is wet out there.. or wet to bring my equipment. There is more cutting I could do in the new playground area. Perhaps service my Toro today.. :thinking:


I meant to ask when you mentioned the bench cutting before, but forgot. How much did you have to cut in on the high side of the trail??


hmm maybe 6" or so.. we will see how that works. I think it will be level enough [still want a slight outslope] It just might not be wide enough... :thinking:


A couple hundred feet sounds like a bit of work then. :thinking:
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby toypusher » Tue Apr 19, 2011 5:26 am

Fenlason wrote:
toypusher wrote:
Fenlason wrote:
toypusher wrote:
Fenlason wrote:I got my 3 Whitcomb latches in... :D

I have some doors downstairs that need finishing.. and latches. :thinking:

I think I will wait until I get my planer in.


Planer? Whatcha getting?? I have a Delta 12.5" portable planer.


hmmm a Porta Cable Jointer Planer..

I had an ancient Sears one.. that sits and hums now... :roll:


anything that you know? :lol:


no.... :thinking: I think it was a country song.. :roll: :lol:


Send it over to Paul. Maybe they could get a decent tune going!! :lol:
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top
PreviousNext
Post a reply

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 3 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group