Line Filter

Anything electric, AC or DC

Line Filter

Postby Forrest747 » Sun May 31, 2009 12:13 am

I have come across a line flilter that helps smooth out electircal spikes. I am thinking of adding this to my system. nayone else use these. I am thinking just one more thing to aid in keeping the electrical system safe. or just another thing to get fried.
"All the success on the trail can not compensate for having square headlights"

"I've got a fever and the only prescription is more cowbell!"
http://www.tnttt.com/viewtopic.php?f=50&t=37701 Build Journal
User avatar
Forrest747
Cowbell Donating Member
 
Posts: 1327
Images: 447
Joined: Mon Apr 06, 2009 3:40 am
Location: West Valley Utah, Utah

Postby Boodro » Sun May 31, 2009 8:17 pm

Hi , just a question. Are you running any sensitive electronics?( laptop,dvd,expensive stereo) If you are you may need it for peace of mind. If you are just running lights,coffee maker,microwave etc. most campground power would be good as long as you have the needed power breakers or fuses in place in your system.
Just my 2 sense!! Good luck! :applause: :applause:
We are all travelers in this world , from the sweet grass to the packin house , birth till death , we travel between the eternities . ( Robert Duvall as Prentiss Ritter)
User avatar
Boodro
1000 Club
1000 Club
 
Posts: 1052
Images: 101
Joined: Sun Oct 10, 2004 9:35 pm
Location: Sylvania, Ohio

Postby Lgboro » Sun May 31, 2009 10:26 pm

If you are running led lights you will need to regulate the current or your leds will burn out prematurely. (or use resistors to reduce the current each led receives)
User avatar
Lgboro
500 Club
 
Posts: 708
Images: 53
Joined: Sun Apr 06, 2008 7:57 am
Location: Dudley, NC
Top

Postby wlooper89 » Sat Jul 04, 2009 11:28 pm

I have always thought of campground power as pretty much the same as residential power. So I would not expect any special filter to be necessary. Maybe a surge protection device for electronics.

If converting 120 AC to 12 V DC then some filtering is necessary. I prefer to call it smoothing. But terminology aside, a transformer can convert 120 AC to 12 AC and then a bridge rectifier can change the current to 12 V pulsating DC. A capacitor then smoothes out the pulses to provide normal 12 V DC. This is what a converter basically does.

This all came to me while staying at a Holiday Inn Express. :D

Bill
User avatar
wlooper89
Gold Donating Member
 
Posts: 581
Images: 75
Joined: Sun Dec 31, 2006 9:47 pm
Location: Atlanta, GA
Top


Return to Electrical Secrets

Who is online

Users browsing this forum: No registered users and 2 guests