Parts Advice Needed

[Classic Finn]

Dear friends

I found one place, named Northern Tool for axles..

Can any of you pros recommend a full axle and short stubb axle for
a 4x 8 Kit tear from there.. Id like to get an ajustable one for height.

And one for a 5 x 8

Both not exceeding 750 Kilo or 1650 pounds in weight and brakeless.

here is the website....

http://www.northerntool.com/webapp/wcs/ ... 839+166843

Classic Finn

[elmo]

Sorry...I don't have a answer for you...just stopping by to check on you and to say Hello!

Hello!

By the way isn't it almost 2 am?

[madjack]

Heikki, you will have to get Flexi-Rides from http://etrailerpart.com/ if you adjustablility...the ones Northern Tools aren't adjustable and come in stock sizes only..........
madjack

[Classic Finn]

Sorry...I don't have a answer for you...just stopping by to check on you and to say Hello!

Hello!

By the way isn't it almost 2 am?

Ohh Hello Elmo, I see your watching the clock there and chasing me to bed.. Im going shortly...

[Classic Finn]

Heikki, you will have to get Flexi-Rides from http://etrailerpart.com/ if you adjustablility...the ones Northern Tools aren't adjustable and come in stock sizes only..........
madjack

I wrote an email to UCF America inquiring about possible European or Scandinavian Reps also..

But okidoki I gotcha Madjack Thank You.

Heikki

[Classic Finn]

Heikki, you will have to get Flexi-Rides from http://etrailerpart.com/ if you adjustablility...the ones Northern Tools aren't adjustable and come in stock sizes only..........
madjack

Madjack I looked at your advised site and here.

http://www.southwestwheel.com/store/c-2 ... axles.aspx and
full axles

http://www.southwestwheel.com/store/p-2 ... -axle.aspx

which do you recommend?

Heikki

[madjack]

...which do you want????? ...would shipping the stubbies be cheaper/simpler/easier...stubbies require additional construction/engineering for installation over a fullalxe...the full axle torsion axles act as a crossmember as well...the stubbies are less expensive BUT once again that cost is somewhat offset by the need for extra framing...those choices/decisions will havvta be made by you...AND you will havvta decide on body measurments, wheel sizes/offsets and other factors, since these axles are custom made when ordered..
madjack

[Classic Finn]

...which do you want????? ...would shipping the stubbies be cheaper/simpler/easier...stubbies require additional construction/engineering for installation over a fullalxe...the full axle torsion axles act as a crossmember as well...the stubbies are less expensive BUT once again that cost is somewhat offset by the need for extra framing...those choices/decisions will havvta be made by you...AND you will havvta decide on body measurments, wheel sizes/offsets and other factors, since these axles are custom made when ordered..
madjack

Okeeeeeey I,ll talk also with our
Welder and Pro Man..

He stated this ... 1st we need to find a suitable towbar thats approved then plan the frame around that with axles and wheels on hand..

So we dont have to do senseless EU Garbage again as I learned, I,ll talk to him today..

Thank You Madjack

Heikki