Modifying a chassis from my 10'3" X6'6" pop-up

Ask questions about Harbor Freight trailers, or questions about building your own...

Modifying a chassis from my 10'3" X6'6" pop-up

Postby Bobjr59 » Sat Sep 18, 2010 11:09 pm

The other day I tried to raise the top of my pop-up to start repairs when the cable broke once I finally got the top off I noticed not only the top was a complete loss, rot but a lot of the interior panels and frame was rotten as well :x. So this morning I was talking to a friend that lives an hour and half away suggested to strip it to bare frame and bring it over and modify it down to take a 4X8 floor plan just :thinking: ?
Bobjr59
Teardrop Inspector
 
Posts: 15
Images: 11
Joined: Thu Jan 15, 2009 12:50 am
Location: Covington,GA

Postby bobhenry » Sun Sep 19, 2010 12:24 am

Most popups are on a 6 wide frame. most 6x8 or 6x10. These make a real nice large teardrop because you can sleep side to side. and have a real nice roomy interior and the galley can be a bit deeper also offering more storage area. Here is our co-director Scott's

Image
Growing older but not up !
User avatar
bobhenry
Ten Grand Club
Ten Grand Club
 
Posts: 10368
Images: 2623
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN

Postby Bobjr59 » Sun Sep 19, 2010 1:25 pm

bobhenry wrote:Most popups are on a 6 wide frame. most 6x8 or 6x10. These make a real nice large teardrop because you can sleep side to side. and have a real nice roomy interior and the galley can be a bit deeper also offering more storage area. Here is our co-director Scott's

Image


:thumbsup: :thinking: any more pictures or plans for it??
Bobjr59
Teardrop Inspector
 
Posts: 15
Images: 11
Joined: Thu Jan 15, 2009 12:50 am
Location: Covington,GA
Top


Return to Trailer and Chassis Secrets

Who is online

Users browsing this forum: No registered users and 1 guest