Building my own Trailer,, Some specs on steel

Ask questions about Harbor Freight trailers, or questions about building your own...

Re: Building my own Trailer,, Some specs on steel

Postby TerryB89 » Sun Oct 27, 2019 7:28 pm

I am not welding it, I have a welder lined up he said it doesn't matter how thick it is to him, I guess I am looking for the cheapest and lightest, I think you answered that Hot rolled and 16 ga
TerryB89
Teardrop Builder
 
Posts: 36
Joined: Sun Sep 06, 2015 3:00 pm
Location: Cicero, Indiana

Re: Building my own Trailer,, Some specs on steel

Postby NedB » Sun Jul 10, 2022 5:42 pm

bmr528 wrote:Great advice from all of you..

I have made some changes to my chassis plans

I will use 2 x 2 x.120 for the side rails & tongue

I will use 2 x 1 x 1/8 C Channel for the cross members.

this will shave 79 # off of the trailer weight. 123# instead of 202#

I am happy with that figure

djl



Hi BMR528, it's been 4 years, but I just joined the group a month ago and was thinking very much along these lines, 2x2x120 side rails and tongue, plus 2x2x0.125 C channel cross members. Saves lots of weight and money, plus the C channel makes for a great attachment point for the camper.

So....How'd it all turn out? Are you happy with the design, would you change anything, etc.?

Thanks,

Ned
NedB
Teardrop Inspector
 
Posts: 1
Joined: Tue Jun 28, 2022 9:48 am

Previous

Return to Trailer and Chassis Secrets

Who is online

Users browsing this forum: No registered users and 7 guests