by ssuuki19 » Wed Oct 24, 2018 4:54 pm
Richrad, I know this is a late response but I used Flexiride half-axles on my build, they were 930# total rating, and I got the ones with adjustable splines. If you go this route I highly suggest getting the adjustable splines so you can raise the ride height. My half axles settled in over two inches over the course of 6000 miles, and had to be adjusted. Or in your case you could just shim the mounting brackets. Just keep in mind as I was warned that if you hit major potholes, they may require re-alignment. Take a look at the start of my build thread in your interested to see what they looked like upside down, in a fender mount setup although.
Btw on my build they were always overloaded, and still lasted 11000 miles before needing a re-alignment for toe and camber.
How does sealant get on my triceps and then my car seat?? more than once??
Aluminum is almost as fascinating as wood.
Link to my build thread: 4 1/2 x 9