Rivet Nuts

Ask questions about Harbor Freight trailers, or questions about building your own...

Re: Rivet Nuts

Postby gudmund » Thu Nov 04, 2021 12:52 pm

for what it's worth, years ago when working for Boeing as a mechanic - was sent to Calif. on a factory assist. where we were building food galleys and we used a lot of rivet nuts. When using them, just as we would insert nut to press - we would use a bit of loctite as we inserted them around the edge, than do the pressing of it. I have always done them this way since (and have also used touch-up paint instead every so often when I had no loctite available)
gudmund
500 Club
 
Posts: 999
Images: 39
Joined: Wed Sep 04, 2013 3:58 pm
Location: Camano Island, WN

Previous

Return to Trailer and Chassis Secrets

Who is online

Users browsing this forum: No registered users and 10 guests