This first successful attempt at using the spline function to round off the sharp corners.
![Image](http://tcbunch.com/kiosk/weekender.png)
This one I remove the straight lines to better see the profile. You know, it doesn't look bad.
![Image](http://tcbunch.com/kiosk/long_weekender_profile.png)
This guy is the basic weekender stretched for a 10 foot trailer and rounded. It's not without charm but not nearly as "right" as the 8 footer.
![Image](http://tcbunch.com/kiosk/xl_weekender.png)
Now I need to figure out how to enlarge the drawing to full size to cut out the profile. I wonder if there is anybody out there that will plot full size drawings to use as a template.
Courtney