Hi from the rainy Olympic peninsula WA.

[rubiconchadly]

I've been working on a ttt standy for a few months. It had to be water tight cuz I camp in the rain, more than I want. Also insulated and heated for winter hunting trips. The old wall tent with wood stove just won't do anymore. So any way it needed to be off road/high ground clearance also so I used a jeep axle and springs. I went with 1x2 construction and FRP OUTER SKINS and aluminum roof. I've learned a ton from reading posts and finally got up the nerve to post myself. As soon as I figure out the resizing I will post some photos. I haven't seen too many others using 1x2 framing. I would love to hear from other that did so I can check out your builds and share mine. Happy camping!

[citylights]

Love Olympic Peninsula! Well love to visit anyway...

Welcome to TTT.

I built pretty heavy used 1x2, some 2x2, 3/4 floor and sidewalls. Aluminum skin, 6x10 benroy, if you want to check out my build. All said and done, I should have went lighter. My finished weight is 1750#.