Newbie!

[Hisroad Travels]

Hey this is Harv from Hisroad Travels. I am new here. My wife and I decided to build our own off road micro camper and I am sure I will have a ton of questions so thanks in advance!
My first question is about spindle size on the axel. I have a home built trailer that I bought from someone else. I wanted to use 6 lug Toyota wheels so I need to change the hubs from 5 lug.
When I measure the tapered spindle I am seeing 1 1/4" x 1 1 5/8" but I cant seem to find a hub that uses these measurements. Did I measure wrong? Are these viable measurements?
Let me know your thoughts, thanks again for the info!

harv

[tony.latham]

Let me know your thoughts...

I don't know... but I would contact Etrailer if you don't get an answer here. I've found them very helpful with these kinda questions.

:thumbs-up:

Tony

[twisted lines]

I just measured my spare 3500 lb's;
1" & 1-3/8" with a tape measure