by jwh92020 » Tue Mar 28, 2017 7:13 am
McDave,
My shower is a stall, floor to ceiling. Fan is on the outside back wall of shower. It is rated for a 200 sqft room (bigger than the one in my 6 x 12 secondary bathroom in the house). I figure that should vent steam fairly well. The heater is actually 18" from the fan, so there should be a good draw on the exhaust. I'll put a detector in the bath and test it a few times before I make it permanent. If need be, then I'll fabricate a vent. Thanks for the input.