Our build plan

Converting Cargo Trailers into TTTs

Re: Our build plan

Postby tony.latham » Sat Aug 13, 2022 5:56 pm

nsfr1206 wrote:I have a question about solar. Should I be seeing any charge at all with the lights in my shop or is that not enough?


Sent from my iPhone using Tapatalk
It’s not enough.

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 6900
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: Our build plan

Postby nsfr1206 » Sat Aug 13, 2022 6:06 pm

Thanks


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am

Re: Our build plan

Postby nsfr1206 » Wed Aug 17, 2022 7:39 pm

I bought a closed cell foam kit and foamed the bottom of my trailer. What a mess I made. That stuff sticks to skin real well.


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby nsfr1206 » Wed Aug 17, 2022 7:40 pm

I probably have enough foam left to do the bottom of a teardrop if somebody wants to come get it. West central Alabama…


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby twisted lines » Thu Aug 18, 2022 9:07 am

nsfr1206 wrote:I have a question about solar. Should I be seeing any charge at all with the lights in my shop or is that not enough?


Sent from my iPhone using Tapatalk


I Updated the light’s in my shop with led UFO’s & they do show a charge.
If the light’s are high up, and you need to swap a ballast, that’s when I swapped from 8’ers
Step stool on top of my trailer!
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1218
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: Our build plan

Postby tony.latham » Thu Aug 18, 2022 9:35 am

I Updated the light’s in my shop with led UFO’s & they do show a charge.


I think what you are seeing is an increase in voltage but the amp output is so low it would be a challenge to to measure.

Or so I believe. :thinking:

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 6900
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: Our build plan

Postby twisted lines » Thu Aug 18, 2022 1:39 pm

Voltage increases and your correct not enough to do dittly.
But when we are in and the lites are on +
I know it works a tiny bit! Not enough to try to measure yet.
My list gets longer not shorter, something about retirement I guess
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1218
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: Our build plan

Postby nsfr1206 » Thu Aug 18, 2022 1:42 pm

I think my list is getting shorter. On the trailer anyway. Sealed my windows and doors etc today. Wired in light switches for exterior and main interior lights too. We have a local trip planned for November 4 so gotta get it mostly done anyway. Mattress and beddy are being delivered today also.


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby nsfr1206 » Thu Aug 18, 2022 1:43 pm

I have a tongue scale and it’s showing around 650 lbs when I checked it yesterday. I hope that’s more than 10%.


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby twisted lines » Thu Aug 18, 2022 7:43 pm

nsfr1206 wrote:I have a tongue scale and it’s showing around 650 lbs when I checked it yesterday. I hope that’s more than 10%.


Sent from my iPhone using Tapatalk


I hope Everthing near the chains is approved for that weight. :roll:

A new bed is second on my list :thumbsup:
Last edited by twisted lines on Thu Aug 18, 2022 7:46 pm, edited 1 time in total.
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1218
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: Our build plan

Postby nsfr1206 » Thu Aug 18, 2022 7:45 pm

It’s a 7,000 lb gvwr trailer so probably going to be ok…


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby nsfr1206 » Thu Aug 18, 2022 7:46 pm

I need to go find a scale and roll across and see what the trailer itself weighs


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby nsfr1206 » Fri Aug 26, 2022 9:40 pm

Put a bunch of my slat ceiling up. Getting closer. Need to run over to Houston (around 8.5 hours) to pick up the doors and drawers from my uncle. He builds cabinets and I didn’t want to have to build the doors so… I will probably go over next weekend. I should have almost everything inside trailer completed other than that by then. My blinds may not be here by then yet.


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

Re: Our build plan

Postby hankaye » Sat Aug 27, 2022 10:40 am

nsfr1206, Howdy;

Any truck stop you pull into to refill the gas/fuel tank should have a scale you can weigh the whole rig on.
Get the hitch over the space between the front section and middle section and separate the trailer and
you can get a separate trailer only weight. Be sure you talk to the scale operator first to see if it's Okay to
do they may be going through a busy time and not be able to "work ya in".

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: Our build plan

Postby nsfr1206 » Sat Aug 27, 2022 10:04 pm

Thanks Hank. There is one around 25 miles or so from here I can go weigh on.


Sent from my iPhone using Tapatalk
nsfr1206
Teardrop Master
 
Posts: 191
Joined: Sun Feb 28, 2021 4:32 am
Top

PreviousNext

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 10 guests