Rear galley bulkhead mounting

Converting Cargo Trailers into TTTs

Rear galley bulkhead mounting

Postby ColoradoDropGuy » Tue Feb 06, 2024 10:30 pm

After much debate I’ve decided to build out a cargo trailer conversion camper. The cargo trailer I’m ordering has rear barn doors and will work well with the galley I want to build in the rear. The trailer has 16” on center tube sidewall supports. I want to make the galley 24” deep. How should I mount the bulkhead? The floors are also 16”, the ceiling is 24”. I’ll be insulating all the way around.
ColoradoDropGuy
Teardrop Inspector
 
Posts: 1
Joined: Fri Sep 08, 2023 9:24 am

Re: Rear galley bulkhead mounting

Postby Onajourney » Wed Feb 07, 2024 4:07 pm

I would glue wood same size as the tube members at 24" on the wall and ceiling and use them to pocket hole bulkhead.
User avatar
Onajourney
Teardrop Master
 
Posts: 243
Images: 181
Joined: Mon Sep 06, 2021 2:16 am
Location: Central North Carolina

Re: Rear galley bulkhead mounting

Postby TimC » Wed Feb 07, 2024 6:57 pm

Same as onajourney mentioned. Install the side wall plywood and if the edges of the bulkhead lands between wall struts add some plywood between those struts, between the exterior wall sheathing and the added plywood side walls to anchor the bulkhead where you need it. At that point you have options of using pocket screws or cleats to anchor the bulkhead.
Tim
Niagara, WI
My First Benroy Teardrop Build Thread - A 5x8 Woodie - http://www.tnttt.com/viewtopic.php?f=50&t=63575
My Second Teardrop (partial) Build Thread - Started August '16 - http://www.tnttt.com/viewtopic.php?f=50&t=66939
#3 My son's Benroy Foamie team build - Started July '20 - http://www.tnttt.com/viewtopic.php?f=50&t=72877

Image
User avatar
TimC
Gold Donating Member
 
Posts: 1358
Images: 726
Joined: Sat May 23, 2015 4:15 am
Location: WI/MI border
Top


Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 1 guest