6 X 10 (V-nose) build

Converting Cargo Trailers into TTTs

Re: 6 X 10 (V-nose) build

Postby Modstock » Sat Apr 10, 2021 6:21 pm

Finished up the doors. Cabinet done.
Also fixed the gap at the ceiling.
Image



Sent from my SM-A115AP using Tapatalk
Last edited by Modstock on Sat Apr 10, 2021 11:04 pm, edited 1 time in total.
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah

Re: 6 X 10 (V-nose) build

Postby BigDave_185 » Sat Apr 10, 2021 8:16 pm

What did you do to pull the ceiling down?


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm

Re: 6 X 10 (V-nose) build

Postby Modstock » Sat Apr 10, 2021 11:15 pm

There was two screws that held it up, removed those.
Replaced those with machine screws w/ nuts and a piece of Ktex.
Material had a hole the screws went through. Once bolted down I stapled the material down the backside of the cabinet face. Pulling it down.

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Tue Apr 20, 2021 12:36 pm

Uploaded this last night.
The return to C.o.R.
Enjoy.
https://youtu.be/g8WwoRXs_CA


.

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Thu Apr 22, 2021 10:35 pm

Just for mock-up sake. I picked up a elbow and exhaust cap.
Image
Image

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby hankaye » Fri Apr 23, 2021 6:12 am

Modstock, Howdy;

I understand you are showing us a mock up but you may want to elevate the exhaust to be
above the roof-line to keep the wind from pushing the smoke back into your trailer. :thinking:

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Fri Apr 23, 2021 2:54 pm

Yeah, I need to add at least a foot from the looks of it.
Plus I need to find out where the beam is behind the door panel.
Got all summer to plan it out.


Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Mon May 03, 2021 9:07 pm

Well, im getting a new roof put on the house and didn't want the trailer by its side so, I finally got to see if it fits in the shop.
It was a tense few minutes stopping every few inches, climbing up the ladder, to see if it clears.
And..... it fits !!!

Image
Image

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby onehoser » Tue May 04, 2021 6:25 am

nice! i had to put smaller wheels on my 5x8 to get it into the garage
I am the wisest man alive, for i know one thing, and that is that i know nothing. (socrates)
User avatar
onehoser
The 300 Club
 
Posts: 372
Joined: Sun May 15, 2016 10:41 am
Location: selkirk ontario
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Tue May 18, 2021 10:51 pm

Pulled it out last Wednesday and took it for a 6.5 hr drive down to Big Water, UT.
Then another hour or so on a 30 mile dirt road to reach Alstrom Point overlooking lake Powell.
6am sunrise pic. Image
That next day we explored Crosby canyon down to Warm creek bay.
There's an island you can drive out to but found out the water is a good half mile away.
Took a shortcut and conquered a nasty sandy hillclimb at full throttle to get around to the beach .
Had the whole channel to ourselves.
Image
Image

Spent another night on Alstrom point and moved towards civilization in the morning.
Image

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Tue May 18, 2021 11:15 pm

The next day we checked out the other side of the rim (now that the nudist neighbors had left) before we also moved on.
Image
You can see how tiny the trailer is next to the cliff.
Image

Stopped in Lone Rock Beach but the sand is way too soft and got stuck, had to air down to get back up the hill.
Decided to move on to cooler temperatures and got a refund.
Started heading towards Grand canyon north.
That drive wasn't very fun, steep grades and high winds had me at 45 mph most of the way along the Vermillion cliffs.

Finally reached Grand canyon north just before opening day.
Camp #1 cooler temps, Yay.
Image

Saturday morning 6am.
A line of about 20 vehicles awaiting the gate opening.
Good thing we camped near the entrance.
The first guy in line fell asleep and when the gates opened, the race was on. Everybody went around him.
Soon all of us the RV's got passed as well .
Image




Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Tue May 18, 2021 11:27 pm

We found a spot on a dirt road 5 miles in that had good views of the eastern Grand canyon. Ours had a better wind break with more tree's .
Camp #2
Image
Others had better views.
Image
Image

Grand canyon itself.
Image

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Tue May 18, 2021 11:37 pm

Yesterday morning we packed up and headed for home. Once we reached asphalt it started to snow. A few miles later sunny.
Then we get into Hatch, Utah and snow again.
While on hwy 89 we stopped at the
Moqui cave in Kanab and the Butch Cassidy childhood home.

Image
Image
Some "final destination" stuff right there.
Image
Another random pic or two.




Sent from my SM-A115AP using Tapatalk
Image
Image
Image
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

Re: 6 X 10 (V-nose) build

Postby hankaye » Wed May 19, 2021 7:36 am

Modstock, Howdy;

Thanks for taking us along on your travels. Nice to see some of those areas again.
Did ya swing by The Big Rock Candy mtn.? chuckle.

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: 6 X 10 (V-nose) build

Postby Modstock » Wed May 19, 2021 7:24 pm

That place looked interesting. I liked the Whistle stop boxcars.

Sent from my SM-A115AP using Tapatalk
User avatar
Modstock
1000 Club
1000 Club
 
Posts: 1113
Joined: Wed Feb 01, 2012 1:18 am
Location: Salt lake , Utah
Top

PreviousNext

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 5 guests