Page 67 of 120

Re: HALLMARK 6X12 CONVERSION

PostPosted: Sun Mar 19, 2017 1:28 pm
by Tommy B
More.

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Mar 20, 2017 8:33 am
by hankaye
Tommy B. Howdy;

Excellent pix!!! They tell the story of a happy weekend excursion into the wilds of Fl.
How''s the knee holding up? Nice to "see" how you set things up so that you get the
most from your time in the out there.
:thumbsup: :thumbsup:

hank

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Mar 20, 2017 9:39 am
by Tommy B
Hey Hank!

My knee. Well I had to sit back on the seat some and keep my leg a little straight but it worked ok. I never could have rode the dirt bike.

I almost got my clock cleaned good when a couple guys came blasting around a tight curve. :shock: Missed by less than an inch. You really have to be looking out for that as it is two way traffic. And don't you know I did not have my helmet on cause I loaned it out to a family with kids. They must have thought I said hang on to it or something. I quickly went over and asked for it back. NEVER ride with out a helmet right?

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Mar 20, 2017 11:56 am
by Tommy B
So this should be it. Cant think of anything else to show on this C.T. Maybe a dirty laundry hamper! :roll:

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Mar 20, 2017 12:12 pm
by Tommy B
Happy Trails! :beer:

McDave, the corn beef and cabbage is for you! 8)

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Mar 20, 2017 1:15 pm
by McDave
Yum Yum, Gimme Sum!
Nice job on that trailer, Tommy. Don't be a stranger. (like you could get any stranger...)
Love ya, Brother.

McDave

Re: HALLMARK 6X12 CONVERSION

PostPosted: Fri Mar 31, 2017 10:07 pm
by flboy
Tommy... how's the knee? When will it be KTM ready?

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Apr 03, 2017 9:06 am
by Tommy B
Hey Don! Only now is it 90%. Thought I was done with it all, But Im ok to ride.

I know you have a wedding this month and who knows what else BUT, I did notice the weather this coming weekend in Ocala. That has to be the last cool trip of the season. Highs in the low 70s. :thinking:

I have ordered a motorcycle wheel chock to install in the trailer. Should be here any day. That will again greatly reduce the labor of things when the ATV stays home.

Have a bit of a summer cold right now though. Bad head cold. But Friday is a ways away. :thinking: I would leave Thursday after work or worst case Friday mid-day. Ride all day Saturday chill and leave Sunday mid afternoon. Depends how this cold goes.

When Can you ride/camp?

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Apr 03, 2017 11:25 am
by flboy
My daughter's wedding is this weekend and family is already trickling in. Maybe the weekend with Friday the 14th or the 28th. Those are off Fridays for me so I can show up Thursday evening through Sunday AM.. If heat is a concern, we could do Salt Springs with power hookups to run AC. Can ride out of there and explore and close to Delancey loops. Let me know what you think first and then I need to clear the calendar with my wife.

Sent from my SM-G935P using Tapatalk

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Apr 03, 2017 2:56 pm
by Tommy B
Don will check tomorrow and see what dates are available. But if you have a preference let me know. I will shoot for the 14th.as it is closer. :D

And hopefully cooler.

Re: HALLMARK 6X12 CONVERSION

PostPosted: Mon Apr 03, 2017 7:40 pm
by flboy
Tommy B wrote:Don will check tomorrow and see what dates are available. But if you have a preference let me know. I will shoot for the 14th.as it is closer. :D

And hopefully cooler.


Tommy, my wife reminded me that is Easter weekend. Let's plan the Friday the 28th and that weekend if you can. I will show up Thursday night. Salt Springs or Delancey?

Re: HALLMARK 6X12 CONVERSION

PostPosted: Tue Apr 04, 2017 7:02 am
by Tommy B
The 28th it is! :thumbsup:
Yes I will leave from work early Thursday afternoon. Can decide were to camp later depending on the weather.

OK?

Re: HALLMARK 6X12 CONVERSION

PostPosted: Tue Apr 04, 2017 12:36 pm
by flboy
Sounds like a plan. I'll give you a call when time is near.

Sent from my SM-G935P using Tapatalk

Re: HALLMARK 6X12 CONVERSION

PostPosted: Sat Apr 08, 2017 1:30 pm
by Tommy B
Went to work on this. A big deal for me. Less effort to camp/ride. Of course not as simple as I had hoped.

Re: HALLMARK 6X12 CONVERSION

PostPosted: Sat Apr 08, 2017 1:38 pm
by Tommy B
More. I had to move the fold down table back some. Re drill stuff.

Also found an easy way to remove the legs. I forgot this was my plan originally. Remove pin/bolt and store legs in bottom of bed frame. Behind the hinges there. easy. :beer: :beer: