Page 1 of 1

Window Installation Question

PostPosted: Sat Aug 21, 2010 6:50 am
by SmilinJack
I'm getting ready to install a window in my cargo conversion. I bought the window from Frank Bear. The window has a rubber seal around the outside lip that will be pulled against the exterior metal of the trailer when the window is installed. My question is should I add silicone or butyl tape to the rubber seal, or will it seal adequately without it?

PostPosted: Sun Aug 22, 2010 5:30 am
by RvMan56
I just got mine and I asked that question, No I was told, I plan to do mine in a day or 2, I have to get the screws first, # 8 x1/2 Stainless steal he said.

Good Luck! :worship:

PostPosted: Mon Aug 23, 2010 7:57 am
by racerrandy
I have been putting in auto glass for over 20 years and you should not need to add any other sealant. The inside rings pulls it together very tight and will seal just fine.


Randy

PostPosted: Mon Aug 23, 2010 6:51 pm
by SmilinJack
Thanks for your replies guys...