Teardrops n Tiny Travel Trailers

http://www.flickr.com/photos/47071222@N07/5420476722/ http://www.flickr.com/people/47071222@N07/
here is where I taped out where we will add the slide out



http://www.flickr.com/photos/47071222@N07/5419870899/ http://www.flickr.com/people/47071222@N07/

here is the tape on the inside for the opeaning for the silde out


http://www.flickr.com/photos/47071222@N07/5419869389/ http://www.flickr.com/people/47071222@N07/

removed the window


http://www.flickr.com/photos/47071222@N07/5420475708/ http://www.flickr.com/people/47071222@N07/

removed the metal


http://www.flickr.com/photos/47071222@N07/5419869863/ http://www.flickr.com/people/47071222@N07/

removed the interior wall


http://www.flickr.com/photos/47071222@N07/5419870363/ http://www.flickr.com/people/47071222@N07/

removed fender and taking off the outer shell

looking good what are you going to use for the slide mechanism ??

they have 100# draw glides at Home depot that I have been looking at

so what are you going to use the space for?

with the trailer anly being 6'wide it ias a little cramped when you have the bed sideways like we do so im adding the slide out to give us room for our feet so they are not tight against the wall

Very good idea and I will be watching to see your process.

I should have the outside skin off today

sounds good as long as its for a bed or cupboard space I cant see using drawer slides being a problem

here is where i took the skin off to get to the studs



removed the insolation and cut the studs to rough opaening

the plywood for the slideout

side all cut out

Putting the side together I glued and screwed them

test fitting

test fit 2

laying out for the window

cutting out the window

installed with window

looking from the inside

looking really good keep up the good work thanks for sharing

Starting to skin the slide out

starting to cut out the window

instaled in the trailer

side veiw

front veiw

VERY NICE!

I can't wait to see it in May!

this is an excellent step by step walk through on how to do this you made it look nice and easy Thank you

Awesome