6x12 Camper-Toy Hauler

Hey Guys,
I am a 23 yr old camping/hunting/fishing etc. guy from East Central Illinois. I have had a large 5th wheel Jayco, a pop-up, and have recently chosen to start on a CT conversion.
I've been lurking and researching for some time and finally found a CT of my very own to get started on a conversion. This will be a simple camper/toy hauler with luxuries kept to a minimum. I'll be hauling a couple 4 wheelers and bunking with my g/f and dog.
The starting point. 1999 6x12 Avenger:
[img][img]http://i1032.photobucket.com/albums/a401/tshoudel/100_1499.jpg[/img]
Got some free foam insulation that was being thrown away at a local job site. I believe this is used to insulate gymnasium type roofs before applying the stucco material:
[/img]
Today I removed all of the Luan, re-attached a fender (blew off during a blow-out w/the previous owner) and just started insulating before the end of the day:
[img][img]http://i1032.photobucket.com/albums/a401/tshoudel/100_1500.jpg[/img]
Some damage from the previous owner. I believe she got into her mailbox when leaving the driveway. This is passenger side, right at the rear, about chest high.
I believe I will excise the damaged area, put in a plate of diamond tread or something similar, and install an RV type "porch light" within the diamond tread plate. This should utilize the existing hole, leaving a finished look. (pics to follow)
[/img]
Today was one of the coldest we've had in this area this winter. (high of 25 w/flurries) And was of course the first day I had time to start work. Much of the work was outside repairing the fender, but i stayed plenty warm.
WAAAY too much heater for a 6x12 box:
[img][img]http://i1032.photobucket.com/albums/a401/tshoudel/100_1505.jpg[/img][/img]
I am a 23 yr old camping/hunting/fishing etc. guy from East Central Illinois. I have had a large 5th wheel Jayco, a pop-up, and have recently chosen to start on a CT conversion.
I've been lurking and researching for some time and finally found a CT of my very own to get started on a conversion. This will be a simple camper/toy hauler with luxuries kept to a minimum. I'll be hauling a couple 4 wheelers and bunking with my g/f and dog.
The starting point. 1999 6x12 Avenger:
[img][img]http://i1032.photobucket.com/albums/a401/tshoudel/100_1499.jpg[/img]
Got some free foam insulation that was being thrown away at a local job site. I believe this is used to insulate gymnasium type roofs before applying the stucco material:
[/img]

Today I removed all of the Luan, re-attached a fender (blew off during a blow-out w/the previous owner) and just started insulating before the end of the day:
[img][img]http://i1032.photobucket.com/albums/a401/tshoudel/100_1500.jpg[/img]
Some damage from the previous owner. I believe she got into her mailbox when leaving the driveway. This is passenger side, right at the rear, about chest high.
I believe I will excise the damaged area, put in a plate of diamond tread or something similar, and install an RV type "porch light" within the diamond tread plate. This should utilize the existing hole, leaving a finished look. (pics to follow)
[/img]

Today was one of the coldest we've had in this area this winter. (high of 25 w/flurries) And was of course the first day I had time to start work. Much of the work was outside repairing the fender, but i stayed plenty warm.
WAAAY too much heater for a 6x12 box:
[img][img]http://i1032.photobucket.com/albums/a401/tshoudel/100_1505.jpg[/img][/img]