Page 1 of 1
6x12 single axle build with ramp

Posted:
Tue Sep 30, 2014 8:04 am
by tbird_1977
Re: 6x12 single axle build with ramp

Posted:
Tue Sep 30, 2014 9:46 am
by hankaye
tbird_1977, Howdy;
Welcome to the forum. Looking forward to see what you come-up with.
hank
Re: 6x12 single axle build with ramp

Posted:
Wed Oct 15, 2014 8:54 am
by tbird_1977
Re: 6x12 single axle build with ramp

Posted:
Wed Oct 15, 2014 11:11 pm
by rebapuck
Will you be using this to haul "toys"?
Re: 6x12 single axle build with ramp

Posted:
Thu Oct 16, 2014 10:57 am
by hankaye
tbird_1977, Howdy;
Question.
In your initial post, Bottom row of pix, you have, for lack of a better name,
some purlins attached to the wall running horizontally and from what you show
in your second post you secured your interior walls (Beadboard), to them. So,
my question is; Did you fill the extra space with insulation or leave it open?
Also, how thick are your walls now and do you have any windows installed?
Ok, a couplea questions.....
hank
Re: 6x12 single axle build with ramp

Posted:
Fri Oct 17, 2014 4:55 pm
by tbird_1977
Yes Rebapuck this will be a toy hauler.
Yes hank I filled the gap between the horizontal strips. Started with 1 inch in between the metal studs. Then filled the gap with 3/4 between the horizontal boards. Puts it at 1-3/4 total foam board. Walls and ceiling same system.
No windows at this time
Re: 6x12 single axle build with ramp

Posted:
Fri Oct 17, 2014 7:38 pm
by hankaye
tbird_1977, Howdy;
Thanks for the answer. I'm thinking that this may be a good
way to escape from the thermal bridging that a lot of us encounter
with the insulation just level with the wall supports.
Thanks again.
hank
Re: 6x12 single axle build with ramp

Posted:
Thu Oct 30, 2014 1:01 pm
by tbird_1977
continuing on almost completed. built in cabinet and lights in

and another
