plumbing question
Posted:
Sun Mar 01, 2015 10:09 amby max6220
getting ready to install all my waste plumbing, My question is the pipe going into the grey tank do you just cut a hole with a hole saw then caulk it in, use a grommet type fitting, glue a fitting to the tank ?? thanks
Re: plumbing question
Posted:
Sun Mar 01, 2015 11:23 amby MtnDon
The grommet type fittings like
Uniseal are great. IMO, better than trying to caulk as they do allow for some wiggle as you bounce down the road and are removable if that is ever necessary
Re: plumbing question
Posted:
Sun Mar 01, 2015 12:00 pmby hankaye
max6220, Howdy;
Fully agree with MtnDon on the grommet seals. It's what is used for the full-sized RVs.
hank