Page 1 of 1

8'x24' V-Nose Cargo Toy Hauler

PostPosted: Wed Jul 27, 2016 11:25 pm
by Antairus
Hey guys New to the Forums. This place is awesome. Tons of Information here. I am sure I will be asking a lot of questions. I do a lot of Riding Off Road in my Can Am Commander.
Got Tired of the whole Tent camping thing. Sold my pop up, because it was getting bothersome to have someone else pull my Toy. So I bought me a 8x24 to pull it with and have some living Quarters.
My Can Am Top Left. It Got Deep.
Image

The Day I picked it up. I was a Little Nervous. Its So Huge.
Image

Took it out for a Trial Run. Loaded up for a day ride. The Dodge Pulled it Fine It Just looked really funny.
Image

So I figured I would Upgrade. Been working hard for 22 years Kids both grown House almost paid for. Figured it was time to get myself something. It will look better behind this Bad Boy.
Image


Set me a Dometic 640315 Low Profile On Top. Already Did The Insulating. Working on the Roof. Almost Done with that part. Here are the First Progress Pics.
Please let me know what you think or if you have any questions please ask.
Image
Image
Image
Image
Image
Image
Image

These are the Lights I got for the ceiling. I hooked one up and wow they will work well. I also understand you can use a dimmer on them.
Image

Re: 8'x24' V-Nose Cargo Toy Hauler

PostPosted: Thu Jul 28, 2016 12:18 am
by AnthonyH
Looking good so far. I get my AC unit on Monday. Will be nice to work in the cool for a change. We have the same size CT so it will be interesting to see what you do with yours.

Sent from my SM-N910V using Tapatalk

Re: 8'x24' V-Nose Cargo Toy Hauler

PostPosted: Thu Jul 28, 2016 1:28 am
by McDave
Great start! Really cool tow vehicle. I can see many great adventures in your future. Have fun!

McDave

Re: 8'x24' V-Nose Cargo Toy Hauler

PostPosted: Mon Aug 01, 2016 7:43 pm
by Antairus
Ceiling is done and Lights are up and working.
Image
Image
Image
Image
Image
I thinkk these are the switches I am going to put next to the door. I am not going to hook up the internal Led and I am going to hit them with Gloss Black to cover the Graphic.
Image

Re: 8'x24' V-Nose Cargo Toy Hauler

PostPosted: Mon Aug 01, 2016 8:05 pm
by msnglinc
Here's what I'm using. Has the dimmer built in and works very well.
Image
Image
Little pricey but I really like how they work. Found them on Ebay.

Re: 8'x24' V-Nose Cargo Toy Hauler

PostPosted: Mon Aug 01, 2016 8:46 pm
by Antairus
Those are cool but My Outside Light over the door is going to be a 7" to 20" Light bar. I bought an Inline remote Dimmer for the inside lights