Re: 6x10 Cargo Mate Challenger
Posted: Sat May 22, 2021 6:53 am
Went camping! Heater came in handy!
Sent from my iPad using Tapatalk
Went camping! Heater came in handy!
Sent from my iPad using Tapatalk
Teardrops n Tiny Travel Trailers
or t n ttt for short (tnttt.com)
https://www.tnttt.com/
6x10 Cargo Mate Challenger
Page 30 of 31
Posted: Sat May 22, 2021 6:53 amWent camping! Heater came in handy!
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Sat May 22, 2021 7:35 amdirt-swabby, Howdy;
Apparently you survived, that's always good news.
Nasty looking photo what with the snow (spit!).
hank
Apparently you survived, that's always good news.
Nasty looking photo what with the snow (spit!).
hank
Re: 6x10 Cargo Mate Challenger
Posted: Sat May 22, 2021 7:41 amThat’s what we woke up to on day two! A week ago it was 80°!hankaye wrote:dirt-swabby, Howdy;
Apparently you survived, that's always good news.
Nasty looking photo what with the snow (spit!).
hank
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Sun May 23, 2021 8:13 amNew tow rig. Looking forward to seeing how it tows!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Sun May 23, 2021 8:45 amWow, very nice! What is under hood?
Sent from my SM-N970U using Tapatalk
Sent from my SM-N970U using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Sun May 23, 2021 9:31 amV6flboy wrote:Wow, very nice! What is under hood?
Sent from my SM-N970U using Tapatalk
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Sun May 30, 2021 7:55 amI have always thought that I do a pretty thorough pre trip check before heading out. Well last trip out did my normal check of things and headed out. Had 150 miles of washboard to drive and getting to and from camp was normal,or so I thought.
Went to put the rear drivers side stabilizer one when I got home and noticed this
When I left camp it wasn’t this way. So somewhere between camp and home the nut on the shackle bolt for the leaf spring went missing. Fortunately the bolt stayed in place. Max speed on the roads I traveled was 35mph.
Of course it rained all week. Weather finally let up. So I tore into the repair. Thought I’d have no trouble getting a new bolt and bushing locally, wrong. So I had to order parts from Etrailer.
Few other issues were uncovered once I got the tire off. The wiring for the running light has been rubbing on the tire. There was too much wire. So I shortened that and replaced the connection with a heat shrink solder connection. Also the fender has been loose. The factory missed the one stud, and put a bunch of screws into the siding. They even left the missed holes exposed... at some point I’ll replace the fenders with Jeep style. When 8 do that I’ll add blocking in he wall for a bolted connection. For now I just riveted the fender to the skin.
Love having the jack for lifting the trailer. Worked great for getting the tire off.
Wire rubbed bare.
Nice of the factory to pre drill holes for me to rivet the fender on...
While I’m waiting fir parts I’ll inspect the bearings and replace if needed or goop up the ones that are in there if not.
Half tempted to order a brake kit and throw those on. While everything is apart.
Sent from my iPad using Tapatalk
Went to put the rear drivers side stabilizer one when I got home and noticed this
When I left camp it wasn’t this way. So somewhere between camp and home the nut on the shackle bolt for the leaf spring went missing. Fortunately the bolt stayed in place. Max speed on the roads I traveled was 35mph.
Of course it rained all week. Weather finally let up. So I tore into the repair. Thought I’d have no trouble getting a new bolt and bushing locally, wrong. So I had to order parts from Etrailer.
Few other issues were uncovered once I got the tire off. The wiring for the running light has been rubbing on the tire. There was too much wire. So I shortened that and replaced the connection with a heat shrink solder connection. Also the fender has been loose. The factory missed the one stud, and put a bunch of screws into the siding. They even left the missed holes exposed... at some point I’ll replace the fenders with Jeep style. When 8 do that I’ll add blocking in he wall for a bolted connection. For now I just riveted the fender to the skin.
Love having the jack for lifting the trailer. Worked great for getting the tire off.
Wire rubbed bare.
Nice of the factory to pre drill holes for me to rivet the fender on...
While I’m waiting fir parts I’ll inspect the bearings and replace if needed or goop up the ones that are in there if not.
Half tempted to order a brake kit and throw those on. While everything is apart.
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Sun May 30, 2021 7:58 amAlmost forgot Rich Solar got me set up with a new solar system!
Still dealing with Renogy trying to get my money back on the order that never shipped.
Sent from my iPad using Tapatalk
Still dealing with Renogy trying to get my money back on the order that never shipped.
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Mon May 31, 2021 9:35 pmStarted assembling my new solar array.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Mon May 31, 2021 10:51 pmlooks nice. I am hopefully going to install my solar array this week as well. Good luck!
Re: 6x10 Cargo Mate Challenger
Posted: Sun Jun 06, 2021 8:02 pmWe had a hot spell and my solar project was put on hold. While I waited for things to cool down the parts showed up to fix the shackles. I went with Dexters heavy duty greasable replacement kit, ordered from Etrailer
I had to use the grinder to cut off the other bolts. Even after soaking with the good stuff and heating with a torch they wouldn’t budge. I was in a rush and didn’t take outs of pics
Today the temps dropped and I was able to get the solar array in place. I decided that I needed more support so I ordered another set of roof racks.installed one more.
I was hoping the panels would sit below the top of the rack, but the sit proud by a 1/4”
So I need longer bolts and need to space them down a bit
The old plastic bearing! Wow! The new ones are metal of some sort.
Sent from my iPad using Tapatalk
I had to use the grinder to cut off the other bolts. Even after soaking with the good stuff and heating with a torch they wouldn’t budge. I was in a rush and didn’t take outs of pics
Today the temps dropped and I was able to get the solar array in place. I decided that I needed more support so I ordered another set of roof racks.installed one more.
I was hoping the panels would sit below the top of the rack, but the sit proud by a 1/4”
So I need longer bolts and need to space them down a bit
The old plastic bearing! Wow! The new ones are metal of some sort.
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Mon Jun 14, 2021 8:19 am
Wrapped up the Rich solar system install. All’s running full steam ahead!
Sent from my iPad using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Mon Jun 14, 2021 8:26 amDust swabby, Howdy;
Think you could make those pix any bigger???
hank
Think you could make those pix any bigger???
hank
Re: 6x10 Cargo Mate Challenger
Posted: Mon Jun 14, 2021 8:55 amLooks good! That will keep your batteries happy!
Sent from my SM-N970U using Tapatalk
Sent from my SM-N970U using Tapatalk
Re: 6x10 Cargo Mate Challenger
Posted: Mon Jun 14, 2021 2:26 pmYeah sometimes when posting from Tapatalk app the photos end up coming in too big.hankaye wrote:Dust swabby, Howdy;
Think you could make those pix any bigger???
hank
Sent from my iPad using Tapatalk