recumbent bike plans

[rainman0]

I am looking to build a recumbent. Does anyone have any plans or ideas?
Thanks.
Mr. Buzz, if you are out there, I know you have built some.

[kirkman]

Here is one I found a while ago.bike link

[rainman0]

Here is one I found a while ago.bike link

Thanks for the link. Pictures were very interesting, but I am not sure what language they were speaking.

[Kevin & Sandy]

I built one a few years ago using this site. Simple to do just check and double check to keep everything square when welding !! It goes down the road pretty well !!


http://www.recycledrecumbent.com/

[Greg M]

Here's a few limks to get you started

http://www.ihpva.org/people/tstrike/building/index.htm
http://www.ihpva.org/com/PracticalInnov ... index.html
http://www.recumbents.com/wisil/whatsup.htm
http://members19.clubphoto.com/garrie69 ... st-1.phtml
http://www.manytracks.com/recumbent.htm
http://homepages.nildram.co.uk/~talizma ... cycles.htm
http://mysite.verizon.net/res8j4jm/Recu ... 0Bikes.htm
http://www.kreuzotter.de/english/elenk.htm
http://carbonbent.bravehost.com/index.html

-Greg

[Mauleskinner]

I recommend this one...



Plans are available from this guy...
http://mysite.verizon.net/res88kr1/

David

[RC]

Here is one I found a while ago.bike link

Thanks for the link. Pictures were very interesting, but I am not sure what language they were speaking.

Swedish...
But didn't it get translated for you?

[HSandy]

I built one a few years ago using this site. Simple to do just check and double check to keep everything square when welding !! It goes down the road pretty well !!


http://www.recycledrecumbent.com/

I am not so good with a welder or brazing so I bought a frame from A.D. at recycledrecumbent.com and built it up into a very nice bike which I rode quite a bit until giving it to my nephew.

[rowerwet]

check on instructables.com quite a few designs there and some that don't need welding.