Let begin by saying I am new to tear drop campers and have been reading alot, but can't find many builds that share the same angular shape as mine. I bought this camper in this condition(during a dry spell), with it being almost finished and just needing storage/galley work. Later on during a heavy rain I decided to look inside and found it was leaking a decent amount. I tore the ceiling out and found it had no water stains or mold, so hopefully the wood is fine, and I'm looking at redoing the outside skin. I believe the issue is the way the wood trim would just create puddles of water that would eventually start to seep in. The original build used FRP with wood trim and I'm trying to decide if I can reuse the FRP and just switch to a thinner trim, like aluminum, but I am essentially looking for something that will be waterproof, decent to look at, and fairly cheap. It looks like the actual side and top panels are OSB plywood. Does anyone have any advice or builds that look similar to this setup? Thanks!