Page 1 of 2
cant make up my mind ......oh yeah hello this forum...

Posted:
Wed Nov 08, 2006 4:53 pm
by billydj
been drawing a lot but my design keeps evolving into a reverse teardrop"ttt" ......low at the hitch side and 5 feet high at the back( like a "toyhauler".....mostly cause my main plan with a galley at the front just doesnt seem to balance out for tongue weight.....the highback design has a straight up and down hatch and removable galley setup....total length without tongue is 10 feet...give or take....side door about 2 feet from rear and features a in or out galley and drop floor.....
cant find any similar designs out there....or have I missed it???
I will try and post a scan.........

Posted:
Wed Nov 08, 2006 8:30 pm
by cwm
That sounds interesting. I'd like to see a drawing of it.

Posted:
Wed Nov 08, 2006 9:05 pm
by mikeschn
Hi Billy,
Any luck with that scan?
Welcome to the forum too!
If you are building backwards, then take a look at the escape hatch!
Mike...
drawing not conforming....

Posted:
Thu Nov 09, 2006 1:11 am
by billydj
sorry will try again tomorrow...guess I have to try another way to post it....says to big or corrupted
thanks for the replies
bill

Posted:
Thu Nov 09, 2006 5:12 am
by mikeschn
If it's too big, resize it. See "help with photos" up there in the menu. You want your scans to be 640x480, or 480x640
Mike...
drawing in album

Posted:
Thu Nov 09, 2006 6:42 pm
by billydj
too much like work.....finally got picture in album but need to go about getting it there easier and better.......will have to come up with a better way to scan in drawings so they dont need to be altered once scanned
by the way.......does anybody sleep around here...... or are we on computers all night and day
bill

Posted:
Thu Nov 09, 2006 6:57 pm
by Spadinator
I work graves...7pm to 7am so yep....I am on the computer all night!!


Posted:
Thu Nov 09, 2006 8:13 pm
by asianflava
6PM to 6AM for me

Posted:
Thu Nov 09, 2006 10:55 pm
by cwm
I like the layout. You might need to move your axle back a little though.
axle

Posted:
Thu Nov 09, 2006 11:07 pm
by billydj
I was thinking the axle has to move too.....might have to put the door in the back hatch and split the galley.......but really changes floor plan around......or make the door with an arc out of the bottom to move the axle closer to the back??????? having the same problem with axle placement on my other plan for a regular teardrop.....
bill

Posted:
Fri Nov 10, 2006 12:43 am
by bledsoe3
8:00 pm - 6:00 am here.
I thought it was just Rocky and I.

Posted:
Fri Nov 10, 2006 1:00 am
by dacrazyrn
1800-0600 in the ED (not usually on the puter though).
Yes I am a vampire...Nurseferatu, that is. blah, blah, blah.

Posted:
Fri Nov 10, 2006 5:15 am
by mikeschn
I'd put the tongue on the other end...
Mike...

Posted:
Sun Nov 26, 2006 1:45 pm
by ryncole

Hi billy, i'm just north of you in berlin, how's it going?
howdy back neighbor.....

Posted:
Sun Nov 26, 2006 7:53 pm
by billydj
only 15 miles away....might have to talk teardrops over a cup of coffee or "something".........I"m still gathering info.........sent ya an email
this site is awesome.......just takes time to look over everything
bill