9/13/12
This is going behind my trail truck, a 1985 toyota 4x4 pickup, and so I will be adding a 1" HREW basic cage around the outside and will be getting a Toyota 8" rear axle and springs so as to serve as a spare parts holder per-say. Found a sweet deal on 4 sheets of Filon siding and my dad got to get some parts off a trailer that was being demolished so costs have been under $1500 so far. Have some of the older pictures, haven't scanned any of the new ones.
Update: 10/1/13
So been awhile but I finally got my trailer and started dialing it in and modifying it. My dad made me a solid starting point.
Now this picture is before I installed the struts to keep the hatch up. By the way I used the large "Bed Lift" kit from Camping world and it works PERFECT for this!
And here is how it sits now. 2 cans of spray paint made this thing look fantastic! This also has a 16 gal fresh water tank under the rear with an off/on galley faucet. Sink has a dump hose that goes out the bottom through a close-able wood flap. The 45W harbor freight solar panel kit works great and the stand made it easy to keep it in direct sunlight. Has a large marine deep cycle battery, a converter reused from an old camp trailer for when hookups are available, a 800W Coleman inverter for dry camping. Still need to finish the entertainment system on the inside. Also need to switch to LED's for the lights that aren't already LED.
10/4/13
Couple action shots
