Sealing home made door.

[albion2]

I just finished cutting out the door from the plywood sides,How did you guys managed to seal your home made doors on the out side, on the hinge side.

[jeporter25]

That depends on the hinge. I used a Fridge style hinge and attached the T molding to all sides of the door. the seal was attached to the T molding. For a piano hinge you would need to either have some sort of offset so that a seal could fit inside of the hinge or you would have to wrap the outside of the hinge with rubber.

[albion2]

Thanks for the ideas

[rowerwet]

I put a frame ring on the inside for the door to seal against, I believe the link is in my signature