clintstuckless wrote:Would you be willing to share the CNC files.
Unfortunately, this is not my design. I've modified the files provided to me by Dave McCamant (
http://tnttt.com/memberlist.php?mode=viewprofile&u=10034) from this forum. His build is the Atma Travelear (
http://tnttt.com/viewtopic.php?f=50&t=35081), which is very inspirational to some of the new builders on this site. I'd be happy to share what I did, if he gives me permission. You may also want to get the files from him directly, as I've not only modified them, but did so in a different program. Using Illustrator caused us to have to do additional work in the software that runs the CNC machine. For some reason, the CNC saw each line as 2 cuts, instead of a single path. My CNC guy knew how to fix this, but it took time. I'm not sure Dave's original files do that. As far as the files for the Tongue box, I have no problem sharing those, since it's my design.
I hope to finish the steam box this weekend, and test some wood bending. It's getting warmer here so I should be ready to go when my custom trailer arrives in early April.
Mike.