Matthewp's MuTTT (Multiple Terrain Tactical Teardrop).

[Martiangod]

Definitely looking serious
Looks like the frame should withstand " All Out Tactical Warfare"
It would look at home with a Bren Gun mounted and deployed atop her

Could wage war on the mesquitos when ya go campin

[bdosborn]

Let me guess, your little hatch box key says CH751 on the side?

Bruce

[matthewp]

Let me guess, your little hatch box key says CH751 on the side?

Bruce

Of course! Would we expect anything else from ebay!

[Martiangod]

Almost every compartment door on the planet is a 751 key, uless its a slam catch, then its a R001

[bdosborn]

Yup, just a heads up that we all have the same key you do.

Bruce

[matthewp]

Yup, just a heads up that we all have the same key you do.

Bruce

I guess I'll just have to share the beer since I can't effectively lock it up!

[bdosborn]

Bruce

[Ned B]

That is one FINE looking bulletproof trailer! Will be following along with great interest to see it completed, well done!

[nathan.land]

Great looking trailer, it should last forever once it is finished.

[matthewp]

The glaciers have receded, time to start drinking wine and cutting wood! The trailer build is back on. Look what followed me home from the lumber yard today...

[Junkboy999]

Ha hahaha Another Trailer for a second Tear drop haha hahahah


Just saw and read your log today. sweet looking frame. love the attention to the detail for storage and protection of needed items.

[matthewp]

It was nice to get some woodworking started. Today was all about the side walls for the sleeping area. I'm using 1/2" marine ply for the outer skin and 3/4" marine ply for the skeletonized middle section (for the insulation). The roof will end up being double 5mm ply over 2" X 2" spars (insulated, of course!).



The side exterior for the driver's side with the door and utility hatch (water supply, electrical supply, battery meter, etc.) test fit.



The design drawing for the skeletonized middle wall...



... And the cut section in wood.

[tonyj]

The glaciers have receded, time to start drinking wine and cutting wood!

Just a suggestion, cut the wood, then, drink the wine.

We have lots of infamous threads (with pictures) when that order isn't followed.

[matthewp]

The glaciers have receded, time to start drinking wine and cutting wood!

Just a suggestion, cut the wood, then, drink the wine.

We have lots of infamous threads (with pictures) when that order isn't followed.

Have no fear Sir! The wine is for medicating my old bones after I'm done! Thanks for the double-check though.

It's starting to look like a camper... And a little bigger than I thought it would look! All the numbers are adding up though.

ImageUploadedByTapatalk1398640238.519924.jpg (166.8 KiB) Viewed 1746 times

... And we can't forget to mount the can-holders!

ImageUploadedByTapatalk1398640259.284967.jpg (155.02 KiB) Viewed 1746 times

[matthewp]

So, how does a paranoid builder who fears equipment failure secure the walls of their teardrop?

5/16" bolts and tee-nuts!

ImageUploadedByTapatalk1398728104.930148.jpg (116.37 KiB) Viewed 1699 times

ImageUploadedByTapatalk1398728164.114411.jpg (126.45 KiB) Viewed 1699 times

... And, is a 2" X 4" too big for a rear hatch hinge header?

ImageUploadedByTapatalk1398728198.379056.jpg (142.01 KiB) Viewed 1699 times