Serenity TearDrop Build

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Serenity TearDrop Build

Postby western traveler » Sun May 09, 2021 9:27 pm

Well, I am not going to be posting CAD’s and such. I will be following Tony.Latham’s book closely on this build.
Attachments
96A4ED58-9772-4277-8B9C-00953F74C0E1.jpeg
96A4ED58-9772-4277-8B9C-00953F74C0E1.jpeg (47.19 KiB) Viewed 4382 times
Last edited by western traveler on Tue Aug 10, 2021 11:42 pm, edited 2 times in total.
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Sun May 09, 2021 9:39 pm

I started ordering parts and supplies for my build 3 months ago anticipating the delays that were being conveyed to me. It was not unfounded. just recently received my Dexter Tor-flex axle and Challenger doors. I found a local rancher that employs a fabricator/ranch-hand that was willing to build my trailer frame during their calving season this winter. It worked out well though 1/8th inch square tubing was unavailable. We elected to use heavier material. The trailer sat unfinished due to axle and tire delays. I spent the time running to the City to make other purchases and pick up my wood order from the next town over.
Attachments
67DB95CE-F947-4DCF-95B4-B0B6CC0ED297.jpeg
67DB95CE-F947-4DCF-95B4-B0B6CC0ED297.jpeg (81.15 KiB) Viewed 4376 times
Last edited by western traveler on Sat Jul 10, 2021 9:45 am, edited 3 times in total.
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Sun May 09, 2021 9:48 pm

I have a look in mind though I am unsure of my ability to accomplish it. I like the retro look woody’s. We Will see how that all works out.
I ordered automotive paint from a supplier that can put it in rattle cans. My first project while waiting for the axle was to prep and paint out the steel wheels. I was reluctant to paint over powder coat but after sanding on the back of one of the rims I don’t think adhesion is going to be a problem.
Attachments
F1A502A1-28C3-4457-9CAD-DFADF16A8401.jpeg
F1A502A1-28C3-4457-9CAD-DFADF16A8401.jpeg (123.62 KiB) Viewed 4374 times
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Sun May 09, 2021 9:49 pm

...and the look I am seeking...
Attachments
60530DD4-BC74-4FB7-9F8C-C0F9A93099C5.jpeg
60530DD4-BC74-4FB7-9F8C-C0F9A93099C5.jpeg (100.76 KiB) Viewed 4373 times
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Sun May 09, 2021 10:07 pm

The trailer sat unfinished until the axle finally showed up on the same day the tire order arrived. The trailer was completed the next morning and I brought it home.
We used the plans Tony.Latham provided and the fabricator had practically no questions.
Attachments
145F1CED-502F-4D4E-8FB9-16D894A0B8F5.jpeg
145F1CED-502F-4D4E-8FB9-16D894A0B8F5.jpeg (172.33 KiB) Viewed 4368 times
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Mon May 10, 2021 7:45 am

I sanded, and wiped down to remove the steel residue and wire wheeled where necessary. I then applied two coats of primer and rolled two coats of enamel to finish it off.
Attachments
ACF329F2-4BC4-467A-B12B-4C58E7D9A592.jpeg
ACF329F2-4BC4-467A-B12B-4C58E7D9A592.jpeg (189.18 KiB) Viewed 4299 times
Last edited by western traveler on Thu Sep 16, 2021 9:22 am, edited 1 time in total.
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Mon May 10, 2021 7:48 am

I am pleased with the results.
Attachments
6221ABAB-DFCC-4178-86E1-63CA463E9BE0.jpeg
6221ABAB-DFCC-4178-86E1-63CA463E9BE0.jpeg (177.21 KiB) Viewed 4298 times
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Mon May 10, 2021 8:20 am

I cleared some equipment out of the barn and it has become the work space. I found a set of Job Site sawhorses at a big box store and due to the ability to collapse them when through with the project I decided to go that route instead of building a work table. A couple of 2X4’s and a 3/4” sheet of ply was all that was needed.
I put a tarp over the gravel floor in hopes of catching any stray screws during the build and to be able to vacuum the work space.
I used underlayment for the template. I’ve been a bit concerned about not being able to control the temperature of the environment for glass work but I sealed the template edge with Raka (not pictured) and of course it started snowing a short time later.
It hardened overnight but I will not be attempting that when the glass work begins.
I just had to see what the profile would look like as soon as the template was cut.
Attachments
B92D0B74-1372-4AC6-B1AC-63C35DC41133.jpeg
B92D0B74-1372-4AC6-B1AC-63C35DC41133.jpeg (112.87 KiB) Viewed 4286 times
Last edited by western traveler on Mon May 10, 2021 9:30 am, edited 1 time in total.
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby tony.latham » Mon May 10, 2021 9:07 am

I have yet to know of a builder that doesn't do what you did... mount a wall or template to the trailer to see how she's going to look.

:thumbsup: :thumbsup:

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 6880
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: Serenity (Now) Tear Drop Build

Postby twisted lines » Mon May 10, 2021 9:13 am

Please put the hub cap back on it looked so good :worship:
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1218
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: Serenity (Now) Tear Drop Build

Postby Capebuild » Mon May 10, 2021 4:26 pm

That last picture you posted is really great. The landscape in your backyard Is so beautiful. I travelled to Missoula and surrounding areas a couple of years ago. Beautiful country. Enjoy building your trailer.
"Success can be defined as moving from failure to failure without loss of enthusiasm".... Churchill

Visit my Teardrop build here: viewtopic.php?f=50&t=73779
User avatar
Capebuild
Donating Member
 
Posts: 752
Images: 129
Joined: Sun Jan 31, 2021 6:50 am
Location: Massachusetts
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Tue May 11, 2021 1:07 am

[/album]Need clearance measurements for mounting and door clearance. A bit of trimming to do.. 165158
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby Bezoar » Tue May 11, 2021 9:03 am

I love the shape of that fender - will go well with the painted wheels and hubcaps!
User avatar
Bezoar
Teardrop Master
 
Posts: 155
Images: 37
Joined: Mon Mar 10, 2008 9:01 pm
Location: Southern Wisconsin
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Wed May 12, 2021 3:19 pm

165174165177165179[album]

A very worthwhile guide right there...
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Re: Serenity (Now) Tear Drop Build

Postby western traveler » Thu May 13, 2021 12:58 pm

I have arrived at the worrisome place of cutting two $90 3/4” ACX sheets at one time. Yep, not a typo.
Attachments
E319EF97-71EA-4190-AD81-9063201BD404.jpeg
E319EF97-71EA-4190-AD81-9063201BD404.jpeg (131.08 KiB) Viewed 4061 times
Last edited by western traveler on Thu May 13, 2021 3:58 pm, edited 1 time in total.
western traveler
Donating Member
 
Posts: 396
Images: 264
Joined: Wed Dec 28, 2016 6:59 am
Location: The Front Montana
Top

Next

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 11 guests