The Dutch build

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: The Dutch build

Postby TallGuy7 » Mon Jul 11, 2022 6:58 am

Looks great!

I wonder what happens if you work a lot…


Verzonden vanaf mijn iPhone met Tapatalk
User avatar
TallGuy7
Teardrop Advisor
 
Posts: 92
Images: 26
Joined: Thu Feb 24, 2022 3:32 am
Location: The Netherlands

Re: The Dutch build

Postby Marcogs » Mon Jul 11, 2022 7:07 am

TallGuy7 wrote:Looks great!

I wonder what happens if you work a lot…

Haha, i have a 60hour workweek, but this is therapy


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am

Re: The Dutch build

Postby aggie79 » Mon Jul 11, 2022 3:26 pm

Beautiful work! :applause: :applause: :applause:
Tom (& Linda)
For build info on our former Silver Beatle teardrop:
Build Thread

93503
User avatar
aggie79
Super Duper Lifetime Member
 
Posts: 5405
Images: 686
Joined: Tue Aug 07, 2007 5:42 pm
Location: Watauga, Texas
Top

Re: The Dutch build

Postby Marcogs » Thu Jul 14, 2022 1:50 pm

I want to mount a watertank under the chassis.
Thinking about 74liter. Thats 19.5 gallon.
I wil use the water for drinking/cooking/shower.

What do you think. To much or ………….

MarcoImage


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

Tank size

Postby noseoil » Fri Jul 15, 2022 8:13 am

If you have enough room, can make the plumbing fit & there's enough storage for the gray water, it should be fine. Good to have enough water for travels & camping, but it does add weight, cost, time (& convenience) to the build. We use a water tank which just sits on the galley counter (8L) so there's no need for a gray water storage tank. It's simple to use & always works. I didn't want to take up the room on our build for a kitchen sink, gray water tank, plumbing, pump, drains, etc. That's with a 9' long X 5' wide build. I just didn't want to add all of the complexity, weight & plumbing into a small build which was already pretty "busy" with different systems (12 volt, 110 volt, stereo, TV, sound system, fan, air conditioning, propane, stove, solar, battery, lights, etc.). Perhaps if I did a 10' long build, the extra foot of length could accommodate the water system more easily. There are always compromises to be made with a limited size in a small trailer.

That being said, our shower is a bucket with water warmed by the sun (in the summer only!) & a small pet shower with a battery pump. The dishes are done in a basin which is dumped after each use & there's enough water with 5 gallon storage tanks in the truck for our needs.

I'm going to Bonneville again next month to watch the racing, but I wait to haul water until I'm in Wendover (the town nearest the salt) & use the fire department's hose for my storage. The guys at the station always helpful & it's fun checking in with them each year to see how things are in their community.
Build log: viewtopic.php?f=50&t=60248
The time you spend planning is more important than the time you spend building.........

137905
User avatar
noseoil
1000 Club
1000 Club
 
Posts: 1820
Images: 669
Joined: Sun Apr 27, 2014 8:46 am
Location: Raton, New Mexico, living the good life!
Top

Re: The Dutch build

Postby Marcogs » Mon Jul 18, 2022 10:23 am

Me and my ideas. 104 in the shade and i went shopping for my build.
But very happy (not my bank ballance )
Returned home with some goodiesImage


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

Re: The Dutch build

Postby JasenC » Mon Jul 18, 2022 7:16 pm

Hot water was one of my requirements as well. I have a similar unit on my list.
I'll be done when I'm finished, if that's not fast enough, take a number.

Build Thread https://www.tnttt.com/viewtopic.php?f=50&t=74269
User avatar
JasenC
The 300 Club
 
Posts: 420
Images: 122
Joined: Tue Oct 19, 2021 2:05 am
Location: Snohomish county Wa
Top

Re: The Dutch build

Postby Marcogs » Sat Jul 30, 2022 1:42 pm

Aluminum bracket for watertank under contruction Image


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

The Dutch build

Postby Marcogs » Sat Jul 30, 2022 1:48 pm

It fits well
Tomorrow the support brackets and rubber liner and then see if it fits under the trailer.
Image


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

Re: The Dutch build

Postby JasenC » Sat Jul 30, 2022 1:51 pm

Nice.
I'm planning to try my hand at the no weld aluminum rods for the W/T's and pullout fridge frame.
I'll be done when I'm finished, if that's not fast enough, take a number.

Build Thread https://www.tnttt.com/viewtopic.php?f=50&t=74269
User avatar
JasenC
The 300 Club
 
Posts: 420
Images: 122
Joined: Tue Oct 19, 2021 2:05 am
Location: Snohomish county Wa
Top

Re: The Dutch build

Postby Marcogs » Sat Jul 30, 2022 2:28 pm

JasenC wrote:Nice.
I'm planning to try my hand at the no weld aluminum rods for the W/T's and pullout fridge frame.
What are “no weld alu rods”?


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

Re: The Dutch build

Postby JasenC » Sat Jul 30, 2022 3:32 pm

Marcogs wrote:
JasenC wrote:Nice.
I'm planning to try my hand at the no weld aluminum rods for the W/T's and pullout fridge frame.
What are “no weld alu rods”?


Verzonden vanaf mijn iPhone met Tapatalk


Technically they would be alum brazing rods, all you need is a brazing tip or plumbers torch with MAPP gas. Watched a few videos of people getting welds stronger than the aluminum.
I'll be done when I'm finished, if that's not fast enough, take a number.

Build Thread https://www.tnttt.com/viewtopic.php?f=50&t=74269
User avatar
JasenC
The 300 Club
 
Posts: 420
Images: 122
Joined: Tue Oct 19, 2021 2:05 am
Location: Snohomish county Wa
Top

Re: The Dutch build

Postby Marcogs » Sat Jul 30, 2022 3:40 pm

JasenC wrote:
Marcogs wrote:
JasenC wrote:Nice.
I'm planning to try my hand at the no weld aluminum rods for the W/T's and pullout fridge frame.
What are “no weld alu rods”?


Verzonden vanaf mijn iPhone met Tapatalk


Technically they would be alum brazing rods, all you need is a brazing tip or plumbers torch with MAPP gas. Watched a few videos of people getting welds stronger than the aluminum.
Ok interesting. I myself as a oldschool welder use my tig welder.
Tomorrow hope to finnish my bracket.

Keep on building


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

Re: The Dutch build

Postby JasenC » Sat Jul 30, 2022 4:02 pm

I can melt some steel together well enough that it doesn't fall apart but never have got to try welding aluminum.
I'll be done when I'm finished, if that's not fast enough, take a number.

Build Thread https://www.tnttt.com/viewtopic.php?f=50&t=74269
User avatar
JasenC
The 300 Club
 
Posts: 420
Images: 122
Joined: Tue Oct 19, 2021 2:05 am
Location: Snohomish county Wa
Top

Re: The Dutch build

Postby Marcogs » Mon Aug 01, 2022 12:57 am

Yesterday evening finnished the “tankbuild”
Happy with the result.
This week test fitting.
Image
Image


Verzonden vanaf mijn iPhone met Tapatalk
Marcogs
Teardrop Advisor
 
Posts: 66
Joined: Fri Dec 24, 2021 2:48 am
Top

PreviousNext

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 40 guests