PolyAll - 2 part Urethane

[Prem]

Check this stuff out:

http://www.polyall.com/index.html

My buddy used it to fix his delaminating plywood teardrop. Works great. Might be the ultimate glue for foamies.

[linuxmanxxx]

3 minute setup is something very hard to work with. I emailed them asking if the curing heat was too high for foam.

[Lonewolf42301]

Check this stuff out:

http://www.polyall.com/index.html

My buddy used it to fix his delaminating plywood teardrop. Works great. Might be the ultimate glue for foamies.

Gel Time @ 75F°-2 Minutes 45 Seconds
You would have to be mighty fast working with it when bonding fabric,ect....

[Prem]

Wow. That IS fast! They need a slow-cure version. Thanks for the research.

Prem