

Here’s a Big lesson … This time we used the Gripper for all canvas gluing . After learning how waterproof the Gripper was , testing on the FS roof mod. The T2 as we experienced is only “water resistant” and after a while of constant soaking , the T2 glue does fail , where the Gripper doesn’t …The Gripper is more a PIA to use as you really need to paint it on the foam , and the canvas too , then stick them together while wet … That works very well … !!! Then it’s OK to paint more gripper on the outside to seal off all the fibers … We used a lot of Gripper this time ( 1/2gal + ) , but it was worth it … T2 is great as a glue , but it’s not the best for foam to canvas ( JMHO)