One more line

Canvas covered foamies (Thrifty Alternatives...)

Moderator: eaglesdare

Re: One more line

Postby twisted lines » Thu May 16, 2024 7:33 pm

Last one, because it told me only 3 pictures!
Have the wheelbase set now :worship: near finished with the frame.
Now it's built to fit instead of as drawn.
Attachments
Cutting.jpg
Cutting.jpg (45.34 KiB) Viewed 331 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson

Re: One more line

Postby twisted lines » Sun May 26, 2024 7:05 pm

After cutting 2" off the back and tapering it to the front,
This is where the difference shows up! (The piece that's too tall with a pencil line)
Little worried about a drip edge.
Sides will be the same angle in, as the top that's marked comes down. :worship:
Tail.jpg
Tail.jpg (20.24 KiB) Viewed 300 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson

Re: One more line

Postby twisted lines » Sun Jun 02, 2024 9:22 am

Trimmed both rear sides, Think Ill like it.
And started the back of the Frame / Bumper;
Need's leveled, either the tape will hold it or not :lol:
Attachments
spindal.jpg
spindal.jpg (32.65 KiB) Viewed 258 times
dirt side.jpg
dirt side.jpg (28.19 KiB) Viewed 258 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: One more line

Postby twisted lines » Wed Jun 05, 2024 10:30 am

Spent two days cutting, tweeking 1 tube a little bit in two directions,
because eyeballed wasn't close enough!
And it's for Alignment.
Second picture shows the rear bumper tacked on.
Attachments
cut.jpg
cut.jpg (45.58 KiB) Viewed 215 times
bumper.jpg
bumper.jpg (77.49 KiB) Viewed 215 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: One more line

Postby twisted lines » Thu Jun 06, 2024 3:41 pm

A few day's ago I stopped and :thinking: Naaaa...
Attachments
wrong side up.jpg
wrong side up.jpg (43.05 KiB) Viewed 188 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: One more line

Postby twisted lines » Fri Jun 07, 2024 1:57 pm

Just checking and without a tire it looks like the opening is too big,
so, I put one on.
Now to Back to removable mounts :shock:
Attachments
No tire..jpg
No tire..jpg (40.61 KiB) Viewed 159 times
Tire..jpg
Tire..jpg (42.85 KiB) Viewed 159 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: One more line

Postby twisted lines » Fri Jun 14, 2024 4:11 pm

Rounding the corner's I can;
And trying to figure out the rest ;)
Round over.jpg
Round over.jpg (31.99 KiB) Viewed 93 times
Tape.jpg
Tape.jpg (41.87 KiB) Viewed 77 times
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Re: One more line

Postby twisted lines » Sun Jun 16, 2024 3:18 pm

Last night I attached the rear two pieces using a jig to set the angle, hope there still hanging!

Now I have a stumper ?

Sag in the roof 1/4" to 1/2".
Using 2" foam not attached span 75" X 8'
Pieces are cut just resting in place :lol:

Hang it upside down then FG :thinking:

FG with a tiny crown then attach ?

As my wife still wonders if the floor will hold her weight let alone mine :lol:
Racking up; And Rapin foam
User avatar
twisted lines
1000 Club
1000 Club
 
Posts: 1237
Images: 2
Joined: Wed Oct 10, 2018 4:37 am
Location: Jefferson
Top

Previous

Return to Foamies

Who is online

Users browsing this forum: No registered users and 8 guests