Well i got the door latches and the one missing measurement off the diagram was nowhere near what i thought it would be. Never seen an rv latch before and have no idea why you would build it like they are but whatever. I had to buy a 1/4in sheet of baltic birch, cut out the frame shapes and glue it onto my door. Cut the skins out of 1/8th and cut styrofoam to fit. Glued one door togeather and cut out the hole for the latch in the metal. Have to make it a little bigger but im done for tonight.
1/4in shim on top.
![Image](https://uploads.tapatalk-cdn.com/20171001/6da51c057e1eb4bffc40c90d32d94e18.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/fbc3b48bb96d1a7b1c67b8240e6b76c9.jpg)
Latch installed
![Image](https://uploads.tapatalk-cdn.com/20171001/0a8999eeaa4182877040b1e15e5f5d57.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/d1348787b0c436e91ba45ca91de815ce.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/a5c9a19d4b0300d14a98ca74165336c0.jpg)
The other door.
![Image](https://uploads.tapatalk-cdn.com/20171001/76f9ae0c7c3942e983e65f4ec1d2a12c.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/d0478ca22984ab0824e2fc15d9593f9d.jpg)
I put one fender on today.
![Image](https://uploads.tapatalk-cdn.com/20171001/811e1898ee75c067c3754f020e8486e2.jpg)
Set the tongue box on a bit ago but have to cut shims since the tongue slopes down an inch over the distance of the tongue box.
![Image](https://uploads.tapatalk-cdn.com/20171001/130c17d186bb5b6be26ac0f37a9a4293.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/e9d0b6f675423547a3c12fe09653c71f.jpg)
Got the latches put on and the seal but the handles i bought wont work so i need to get different ones.
![Image](https://uploads.tapatalk-cdn.com/20171001/947b7cfd9a2a8691b4e49537ea0fdd92.jpg)
Got the battery box in, battery installed and some wires run. Wires are run from car to battery, but not secured down since i still need to remove the box to install the shims. I did get the brake wire run and the taillight wires mostly run today. Bought the double insulated 4 wire stuff and put it in conduit from the front of the trsiler to the rear. Installing the conduit was a chore.
![Image](https://uploads.tapatalk-cdn.com/20171001/b552e5095aff611c65448622608f178d.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/0dc61557a81084e941a3abd1941eb949.jpg)
![Image](https://uploads.tapatalk-cdn.com/20171001/d7bcfa915c0defe78425af48d8db1cd1.jpg)
Conduit runs front to back.
![Image](https://uploads.tapatalk-cdn.com/20171001/5369232e7aea34572663cefc4164c373.jpg)
We tried to redo the flooring with contact cement but just have a bigger mess to clean up now.
Sent from my SM-G920W8 using Tapatalk