![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
tape off. most of the excess canvas cut off also.
so full strenght t2 [titebond 2 glue] is used on the foam, then the canvas is laid down. then i used a diluted t2 with water. 2 parts t2 with 1 part water. rolls on nice. when it dries, it dries in a yellow color. no pics sorry.
i was recovering from surgery and i had a deadline to be campbable. so had to work quickly.
but really it was just dried glue.
then i put a coat of primer on. again, no pics. but it was just white.
next i put 2 coats of paint on. i wanted it to match my car.
i think it comes pretty close
![Image](http://i189.photobucket.com/albums/z216/eagles2007-2007/c-6.jpg)
![Image](http://i189.photobucket.com/albums/z216/eagles2007-2007/d-5.jpg)
so full strenght t2 [titebond 2 glue] is used on the foam, then the canvas is laid down. then i used a diluted t2 with water. 2 parts t2 with 1 part water. rolls on nice. when it dries, it dries in a yellow color. no pics sorry.
i was recovering from surgery and i had a deadline to be campbable. so had to work quickly.
but really it was just dried glue.
then i put a coat of primer on. again, no pics. but it was just white.
next i put 2 coats of paint on. i wanted it to match my car.
![Image](http://i189.photobucket.com/albums/z216/eagles2007-2007/a-9.jpg)
i think it comes pretty close
![Image](http://i189.photobucket.com/albums/z216/eagles2007-2007/b-6.jpg)
![Image](http://i189.photobucket.com/albums/z216/eagles2007-2007/c-6.jpg)