Page 2 of 5

Re: New Camper build

PostPosted: Thu Jun 21, 2012 9:13 pm
by Rosey
Cool! I'll See you then!

Re: New Camper build

PostPosted: Fri Jun 22, 2012 4:54 am
by eaglesdare
glen, when you going to jersey?

Re: New Camper build

PostPosted: Fri Jun 22, 2012 5:44 am
by GPW
Too many projects going on now to visit , besides , the wife just got back from up there last night ... 8)
next time I go , will be pulling a decent size Foamie ... :thumbsup:

Re: New Camper build

PostPosted: Sat Jun 23, 2012 7:39 am
by Rosey
Ran into a bit of a delay this week. :( I was planning on painting the springs and re-installing the axle on Wednesday. When I got the springs all cleaned up to paint I discovered a crack in one of the leaves. Guess it's better to find it now instead in the middle of BFE, Texas.

Thursday morning I went by the spring place and found out they no longer make springs as long as the old ones. Spent a good share of the afternoon measuring and contemplating :thinking: . Finally decided to go with some springs 19" shorter then the old ones and ordered them from etrailer.

Got a new pair of rear axle hangers , so I'm going to have to grind some of my new paint off the trailer and weld the new hangers on, then repaint.

I spent all yesterday afternoon in the big blue store, buying plywood, paint , screws, and a/c.

Today I have to play in a charity softball game. Hopefully tomorrow afternoon will be all build time :worship:

Re: New Camper build

PostPosted: Sat Jun 23, 2012 8:45 am
by GPW
Good you found that when you did !!! :thumbsup: I’ve been broke down in BFE several times before .... somewhat less than thrilling !!! :frightened:
Typically:
“ Uh, sir, we have to order that part and it’ll take about 10 days to get in if the truck isn’t delayed by snow or a rock slide . There’s the Motel across the street , it’s the only one we got ... gets kinda’ busy in the evening ... so better get your room now ... and oh yeah , don’t eat the chili ..” :frightened: :NC :R

Re: New Camper build

PostPosted: Mon Jun 25, 2012 5:28 pm
by pete42
glen hope you don't overload the truck with all that foam............

pete

Re: New Camper build

PostPosted: Tue Jun 26, 2012 5:50 am
by GPW
Pete, didn’t happen ... their wholesale prices were higher than Loews or HD ( a third more ) ... I still have trouble understanding that ... :roll: Only thing I can think of is they must supply the Government jobs , where price is seemingly no object ... :R

Re: New Camper build

PostPosted: Sun Jul 01, 2012 9:17 am
by Rosey
So, I had a revelation a couple days ago....the price of airfare has dropped significantly in the past couple weeks. I was actually able to get 2 tickets to Colorado for less then it would cost to drive. I can borrow a car and camping gear from my folks once I get there. Also I've been working way too hard on this trailer project the last couple weeks trying to meet my deadline. This project is for fun :) I already have a job I don't like ;) . That"s why I need a hobby. With this in mind, I have changed up my approach, and plane tickets have been purchased, and I can drink beer while I work on the trailer :beer: I think I'll be much happier!
I have made some progress the last week anyway!
Image
Saturday-The new spring hangers are welded in and the trailer has a second coat of paint.

Sunday- I went to the big blue box store and bought some lumber, paint and an a/c unit.

Monday- Came home from work and took a quick nap. Then went to the big orange box for some foam.
Image
When that was unloaded, I staerted working on the dropped floor.
Image
Image
I had a piece of 3/4 oak ply left over from my kitchen remodel, (just big enough for the dropped section)already stained blue like my cabinets, so I guess I'll have a blue floor. Good thing I like blue :)
Image
Black goo spread around.

Tuesday- When I woke up I found the new springs had arrived from Etrailer.
Image
With the axle reinstalled we were able to push it down the driveway and turn it around. Then I started working on the regular floor.
Image
Image
The work on the floor continued through the week
Image
I'm trying something different on the floor. I stuck strips of canvas about 8"wide along the edges of the bottom side of the floor which will get stuck to the foam. Then I can coat the entire bottom of the floor with black goo and make sure everything is sealed. Oh yeah, I did use some SUPER FOAMIE THREAD WATERPROOFER on the bottom of the plywood too.

Here is a high quality 3d drawing of my plan (not to scale)
Image

Hope everyone is having a good week!

Re: New Camper build-update 7/1/12

PostPosted: Sun Jul 01, 2012 9:39 am
by pappaw
wow that's a great frame

good luck on your build ;)

cheers :beer:

Re: New Camper build-update 7/1/12

PostPosted: Sun Jul 01, 2012 5:32 pm
by GPW
Really coming along now Rosey !!! :thumbsup: Glad you don’t have to rush ... Your design looks COOL, blue floor and all ... 8) 8) 8) :thumbsup:

Re: New Camper build-update 7/1/12

PostPosted: Mon Jul 02, 2012 10:15 pm
by atahoekid
Rosie, I really like that design. It has a classic look to it. If I recall you do your own welding. There's a skill I wish I had. I agree with you, treat it as a hobby and it's less frustrating. 8) 8) And BTW, I love the blue floor. I bleed UCLA blue... Go Bruins!!

Re: New Camper build-update 7/1/12

PostPosted: Tue Jul 03, 2012 3:18 pm
by wagondude
I like it. Looks kind of like a foam version of Doug's Sierra Nomad.

viewtopic.php?f=50&t=32236

Gonna need more popcorn for this one.

Bill

Re: New Camper build-update 7/1/12

PostPosted: Tue Jul 03, 2012 3:30 pm
by Rosey
I can only dream of Doug's quality of finish work. That is a nice trailer. :)

Re: New Camper build-update 7/1/12

PostPosted: Tue Jul 03, 2012 4:03 pm
by GPW
Rosey , you have our upmost confidence you will produce a superior Foamie trailer ... after the boat an all ... :applause: ;)

Re: New Camper build-update 7/1/12

PostPosted: Tue Jul 03, 2012 11:05 pm
by atahoekid
WOOOOW! To hear Doug's name and foamie mentioned in the same breath is high praise indeed. But Rosie, I think you can indeed pull it off. You have my confidence. Go Girl, make us foamlings proud!!! :applause: :applause: :applause: