Re: Generic foamie plans
Posted: Thu Jun 22, 2017 9:45 am
KC,
That sounds like a good idea. I'll have to dust off my CAD program and lay it out and see how it looks.
I'm looking for the simplest construction possible, but weather tight. And I think that requires a seal of some kind.
Probably the only thing on the other side of that blue foam piece is a counter top, maybe a cabinet of some kind.
Maybe I'll try dropping that 25 degree slope all the way down to the bottom and see if I can get a couple cabinets or drawers in low.
Okay, here is the simplification of the back end. It still looks like an awful lot of 25° cuts on the table saw...
Mike...
That sounds like a good idea. I'll have to dust off my CAD program and lay it out and see how it looks.
I'm looking for the simplest construction possible, but weather tight. And I think that requires a seal of some kind.
Probably the only thing on the other side of that blue foam piece is a counter top, maybe a cabinet of some kind.
Maybe I'll try dropping that 25 degree slope all the way down to the bottom and see if I can get a couple cabinets or drawers in low.
Okay, here is the simplification of the back end. It still looks like an awful lot of 25° cuts on the table saw...
Mike...