Page 1 of 1
Tyvek glued to foam instead of canvas?
Posted:
Fri May 18, 2012 1:59 pmby kludge
Especially if you like white.
Just a thought.
Re: Tyvek glued to foam instead of canvas?
Posted:
Fri May 18, 2012 9:30 pmby wagondude
It has been mentioned, but no one has tested it yet. The biggest concern is what to use for adhesive. There was some thought that TB2 might not dry under tyvek and if it did, the tyvek might be too slick for a good bond. Mixed down foam in a can might do it. I haven't found anything that stuff won't stick to.
Bill
Re: Tyvek glued to foam instead of canvas?
Posted:
Fri May 18, 2012 9:51 pmby kludge
For other applications I know some people are using 3M Super 77 spray adhesive.
Re: Tyvek glued to foam instead of canvas?
Posted:
Fri May 18, 2012 10:43 pmby GuitarPhotog
I'll run a test tomorrow with some Fastbond 30. I'm sure I still have a tyvek floppy disk/cd envelope.
<Chas>
Re: Tyvek glued to foam instead of canvas?
Posted:
Sat May 19, 2012 8:08 amby GPW
JMHO, I don’t think Tyvek would offer the strength you’d need , unless it was really THICK ...
Re: Tyvek glued to foam instead of canvas?
Posted:
Sun May 20, 2012 12:15 amby Wolffarmer
I been waiting for some one to mention Tyvek.
Tyvek boatNot much insulation, non really, but a wood framework and tyvek over it.
Randy
Re: Tyvek glued to foam instead of canvas?
Posted:
Sun May 20, 2012 1:46 amby loaderman
The tyvek in the boat is the same as a tarp boat, strength is from the frame.
I thought about a frame and canvass/tarp camper. The made old plains like this
Re: Tyvek glued to foam instead of canvas?
Posted:
Sun May 20, 2012 5:14 amby GPW
3 layers , that could work ...?