Page 1 of 1

Cool Work Bench

PostPosted: Sat May 09, 2015 11:12 am
by ghcoe
Need a work bench for all your tools? Don't have a lot of space? Need it to be easily transportable? Check this out :thumbsup:

http://hackaday.com/2015/05/08/portable ... ore-155015

Re: Cool Work Bench

PostPosted: Sat May 09, 2015 11:45 am
by Fred Trout
Pretty slick ! If I used a shop more than a few days per 10 years or so would be worth constructing, especially if I had all those tools. :R

Re: Cool Work Bench

PostPosted: Sat May 09, 2015 12:36 pm
by halfdome, Danny
That will work, but I prefer the one I built several years ago by modifying some motorcycle lift table plans I bought on the internet.
It's in it's lowest setting ( four total) and can go up to 35" with the aid of a floor jack.
I made a notch in the center for a pallet jack so I can move it about the shop when needed.
It's strong enough that it even held the new 350 engine for my 55 Chevy.
Best bench I've ever worked on, it has served me well over the years.
:D Danny
Image