Teardrops n Tiny Travel Trailers

Posted: **Mon Apr 17, 2023 4:44 pm**

I Guys.
I am in the planning of making a minimal very light PMF foamie teardrop trailer.
I would like your opinion and input about those 2 methods to fill the weave:

Glue the canvas and completely fill the weave with diluted Titebond 2 and then paint.
OR
Glue the canvas with Titebond 2 and then fill the weave with many coats of diluted latex primer and then latex paint.

Any opinion, suggestion or experience sharing is welcome! :peace:

Posted: **Mon Apr 17, 2023 9:40 pm**

lagging compound thinned slightly with your primer.

Posted: **Tue Apr 18, 2023 6:14 am**

I would use paint rather than glue.

Posted: **Tue Apr 18, 2023 6:18 am**

I personally prefer the paint method , it's waterproof ... :thinking:

If you really want to fill the weave , get some concrete block primer . It's very thick and fills a lot !! :thumbsup:

Posted: **Tue Apr 18, 2023 10:57 am**

GPW wrote:I personally prefer the paint method , it's waterproof ... If you really want to fill the weave , get some concrete block primer . It's very thick and fills a lot !!

What I meant was to paint of glue the weave.
I will go with the paint. Thanks!

Teardrops n Tiny Travel Trailers

PMF Foamie: Weave fill with Titebond or with primer/paint?

PMF Foamie: Weave fill with Titebond or with primer/paint?

Re: PMF Foamie: Weave fill with Titebond or with primer/pain

Re: PMF Foamie: Weave fill with Titebond or with primer/pain

Re: PMF Foamie: Weave fill with Titebond or with primer/pain

Re: PMF Foamie: Weave fill with Titebond or with primer/pain