Ultralight/Little Grumman?

This includes traditional teardrop shapes and styles
Post a reply

Ultralight/Little Grumman?

Postby Denny » Fri May 04, 2007 5:46 pm

I posted a pic of my current build on Andrew's Grumman thread a couple of weeks ago and it seemed to create a little interest. I used the ultralight profile, went 4 1/2 wide with the wheels tucked half way under and 4" wide fenders. It may not be exact but it sure makes me think little Grumman. What a cool profile.
I've been building and prefinishing parts all winter and was finally able to put them together this week. The cabin is pretty much complete and now I'm ready to run some wire and fit up the hatch. Here's what it looks like now.
Couldn't wait, had to see the big picture
Image
Starting the cabin skins
Image
cabin skins done
Image
testing LED light strip
Image
Cabin cabinets
Image
Denny
Last edited by Denny on Fri May 04, 2007 10:01 pm, edited 15 times in total.
Build pics: http://community.webshots.com/user/drshop

Some things are just cooler'n h*ll!
User avatar
Denny
Teardrop Inspector
 
Posts: 21
Images: 29
Joined: Wed Sep 08, 2004 12:45 am
Location: Westcliffe CO
Top

Postby the3beers » Fri May 04, 2007 5:53 pm

pict links dont seem to be working :(
User avatar
the3beers
Teardrop Master
 
Posts: 110
Images: 20
Joined: Sun Jun 25, 2006 10:01 pm
Location: Yakima, Wa
Top

Postby Denny » Fri May 04, 2007 6:40 pm

Got it figured out, good to go
Denny
Build pics: http://community.webshots.com/user/drshop

Some things are just cooler'n h*ll!
User avatar
Denny
Teardrop Inspector
 
Posts: 21
Images: 29
Joined: Wed Sep 08, 2004 12:45 am
Location: Westcliffe CO
Top

Postby mikeschn » Fri May 04, 2007 7:53 pm

Hey Denny,

You did a nice job on that! ;)

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Denny » Fri May 04, 2007 9:54 pm

Thanks Mike,
You know if you and Andrew hadn't done such a great job developing this profile I would have perfectly happy with my kit. It will be a while before I find out if it camps as well as the kit but it sure looks cool. If I can find affordable local aluminum I'll be set. Otherwise it will get shot with metallic silver and trimmed with al.
Thanks again for all the effort you put into it.
Denny
Build pics: http://community.webshots.com/user/drshop

Some things are just cooler'n h*ll!
User avatar
Denny
Teardrop Inspector
 
Posts: 21
Images: 29
Joined: Wed Sep 08, 2004 12:45 am
Location: Westcliffe CO
Top

Postby tonyj » Sat May 05, 2007 12:19 am

Denny--great job on a beautiful trailer. I love the trim work. You'll definitely get a well deserved share of compliments. Congratulations on your completion. :applause: :applause: :applause: :applause: :applause:
Still graced with two eyes and ten fingers (due in no small part to luck!).

Just when you think a problem is solved, an uglier result replaces it.

tony
User avatar
tonyj
Super Lifetime Member
 
Posts: 2468
Images: 160
Joined: Mon Sep 26, 2005 10:18 pm
Location: Texas, Corpus Christi
Top

Postby Denny » Sat May 05, 2007 1:49 am

Tony,
Thanks for the applause, very much appreciated. It has to be for this trailer Image
I thought the album might be confusing as it contains pictures of my first build and the current one. I added "first trailer" to the titles of #1 and "ultralight/little gru" to the titles of the current build pics. Hope this cleans things up a bit.
Denny

ps; my garage tonight
Image
Build pics: http://community.webshots.com/user/drshop

Some things are just cooler'n h*ll!
User avatar
Denny
Teardrop Inspector
 
Posts: 21
Images: 29
Joined: Wed Sep 08, 2004 12:45 am
Location: Westcliffe CO
Top

Postby tonyj » Sat May 05, 2007 2:23 am

Well, yes--the compliments were on your first trailer. Now, let me compliment you on the work on the 2nd since I didn't pay attention the first time.

The second is looking every much as impressive as the first. Nice work on the fenders!
Still graced with two eyes and ten fingers (due in no small part to luck!).

Just when you think a problem is solved, an uglier result replaces it.

tony
User avatar
tonyj
Super Lifetime Member
 
Posts: 2468
Images: 160
Joined: Mon Sep 26, 2005 10:18 pm
Location: Texas, Corpus Christi
Top

Postby madjack » Sat May 05, 2007 2:40 am

...darn nice job on the fenders...darn nice profile as well...darnet.......................... 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby mikeschn » Sat May 05, 2007 5:01 am

Denny,

On your woodie, do you have that covered with fiberglass and then spar urethane?

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby BobR » Sat May 05, 2007 5:31 am

Denny...very nicely done. I have workshop envy too!
Bob Richert
Parrish, FL
"Be glad of life because it gives you the chance to love and to work and to play and to look up at the stars"
User avatar
BobR
Donating Member
 
Posts: 387
Images: 1
Joined: Thu Nov 04, 2004 8:12 pm
Location: San Antonio, TX
Top

Postby Denny » Sat May 05, 2007 10:59 am

MJ,
Thanks it's not quite so airish now. The wife's liking it better.

Mike,
No fiberglass on the woody. Just a couple coats of cpes and 10-12 coats of helmsman thinned down and wiped on.

Bob,
Thanks, as for the shop, I have a very supportive wife.
Build pics: http://community.webshots.com/user/drshop

Some things are just cooler'n h*ll!
User avatar
Denny
Teardrop Inspector
 
Posts: 21
Images: 29
Joined: Wed Sep 08, 2004 12:45 am
Location: Westcliffe CO
Top

Postby Denny » Thu May 22, 2008 1:12 am

Well it's finally road worthy. Not really ultra light, weighed 1050 fully loaded and probably not a Grumman either but she sure is fun to take on the road. [imgImage[/img]
[img][img]http://inlinethumb02.webshots.com/40833/2472048110046875904S425x425Q85.jpg[/img]
[/img]
[img[/img]
[img][img]http://inlinethumb53.webshots.com/36148/2651436000046875904S425x425Q85.jpg[/img]
[/img][Imageimg]
[/img]Image
[img][img]http://inlinethumb23.webshots.com/42774/2384315930046875904S425x425Q85.jpg[/img][/img]
Denny
Build pics: http://community.webshots.com/user/drshop

Some things are just cooler'n h*ll!
User avatar
Denny
Teardrop Inspector
 
Posts: 21
Images: 29
Joined: Wed Sep 08, 2004 12:45 am
Location: Westcliffe CO
Top
Post a reply

Return to Traditional Designs

Who is online

Users browsing this forum: No registered users and 3 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group