Page 1 of 1
Scad-A-Bout Profile
Posted:
Tue Feb 15, 2011 2:27 pmby Loader
Been searching the board, and see this questions was asked a few years back however, I didn't find the info I was looking for.
Does anyone have a good profile photo or measurements for a Scad-A-Bout? I does look pretty straight forward (two relatively simple radius), but if someone has a drawing, that would sure help.
Thanks
Posted:
Wed Feb 16, 2011 7:19 pmby james worley
Hello Earl you planning on another build?
James
Posted:
Wed Feb 16, 2011 7:45 pmby len19070
Here's all my shots of Scad-a-Bouts including a very rare (1 of only 3 made) 2 story Scad-a-Bouts.
They are very similar to a Benroy only with 13" wheels.
http://s26.photobucket.com/albums/c106/ ... ?start=all
Happy Trails
Len
Posted:
Wed Feb 16, 2011 10:48 pmby Miriam C.
http://tnttt.com/viewto ... scadabout*
This is a link to Kartvines latest post on his. I think it was a rebuild.
Posted:
Wed Feb 16, 2011 10:58 pmby Loader
Thanks for the link Len and Auntie M. I have been I have been reviewing kartvines resto.
Len, did you build one? I thought I saw some older posts where you were discussing it.
James, yep, we are going to build number 2. I meet with the welder to finalize the trailer on Friday, should have it in about 2 weeks or so. Going to build a Scad-a-bout type profile, however will be modified scad, as I plan to go 5x10 with 15 inch wheels.
Once things get going I'll start my build thread.
Posted:
Wed Feb 16, 2011 11:06 pmby james worley
Good i will watch your progress. I took the easy way out and bought a 6by 12 cargo trailer to convert.
Posted:
Thu Feb 17, 2011 6:13 amby len19070
Loader wrote:Len, did you build one? I thought I saw some older posts where you were discussing it. .
My "Bear Bonze" line was Loosely based on the Scad-a-Bout mainly because of the small wheels that came on the Manufactured frame I use.
Happy trails
Len
Posted:
Thu Feb 17, 2011 7:34 amby Loader
Looks great Len, thanks for posting.
James, is your conversion posted in the Cargo section? I'm going to have to go look for it.
Posted:
Thu Feb 17, 2011 8:13 pmby james worley
Earl it is i will post pictures this weekend.
Posted:
Mon Feb 21, 2011 10:40 pmby 2bits
I will be watching for both of your builds! I have a new trailer build but it's not a tiny trailer
My 65 Scad-A-Bout Restoration project.
Posted:
Tue Feb 22, 2011 8:17 amby kartvines
I will be happy to help answer any questions that you may have as you can see I made more than my share of mistakes, but the overall out come was a solid little trailer, there are much more talent out there than me, but none the less I am open to offer suggestions if asked.
Mike aka Kartvines